Product overview
The MAD Antimatter M6C06 EEE V3 is an AN M6 series brushless motor for multirotor UAV propulsion, with a choice of 160KV and 320KV versions. Its D:72.1× 22.4 mm body incorporates 14 pole pairs, an anticorrosive stator and two 696ZZ bearings. The motor has rain protection and independent centrifugal heat dissipation. Varnished wire is rated at 180°C and magnets at 150°C. Rotor balance is specified as ≤5 mg, with motor balance at ≤10 mg.
Aircraft integration must accommodate the motor body and its 60 mm black silicone leads, specified as 16# Awg. The motor mounting interface is D:32 M4×4; propeller mounting options are D:12 M3×4, D:18 M3×4 and D:20 M3×4. Installation clearance and both mounting patterns require checking before installation. The selected KV version needs a suitable battery voltage, ESC and propeller. Thrust and current assessment must use the exact propulsion combination, while KV alone does not determine payload capacity or flight time.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity and hardware type | Antimatter M6C06 EEE V3 Drone Motor; UAV propulsion motor |
| SKU | 0101DJ2350 |
| Sustained thrust | 2~3kg |
| Maximum thrust | 5.8kg |
| Supported voltage configuration | 320KV/6S, 160KV/12SThe published voltage pairings are 320KV with 6S and 160KV with 12S. |
| Weight | 157g,160g |
| KV options | 160KV or 320KVSelectable KV options. |
| Product identity and purpose | MAD Antimatter M6C06 EEE V3 brushless motor for multirotor UAV propulsion |
| Motor series | AN M6 series |
| Available KV versions | 160KV, 320KV |
| Motor model designation | MAD M6C06 V3 EEE |
| Motor dimensions | D:72.1× 22.4 mm |
| Number of pole pairs | 14 |
| Stator treatment | Anticorrosive |
| Varnished wire temperature rating | 180°C |
| Magnet temperature rating | 150°C |
| Degree of protection | Rain protection |
| Motor leads | 60 mm 16# Awg(Black) silicone |
| Centrifugal heat dissipation | Independent |
| Rotor balance | ≤5 mg |
| Propeller mounting holes | D:12 M3×4,D:18 M3×4,D:20 M3×4 |
| Motor balance | ≤10 mg |
| Shaft diameter | IN: 4 mm |
| Motor mounting holes | D:32 M4×4 |
| Bearing | 696ZZ*2 |
| Disruptive test voltage | 500 V |
| Propulsion integration requirements | Match with a suitable battery voltage, ESC and propellerSelected KV version. |
| Performance selection limitation | Assess thrust and current for the exact combination; KV alone does not determine payload capacity or flight timeExact propulsion combination. |
| Installation requirements | Check installation clearance against the mounting drawing |
| Mounting interface requirements | Check motor and propeller mounting patterns before installation |
Request a quote for MAD Components M6C06 EEE V3 Drone Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
