Product overview
The MAD Antimatter M6C08 IPE V3 Brushless Drone Motor provides propulsion for multirotor UAVs, with a choice of 130KV, 180KV, 260KV or 320KV versions. Its D:72 × 31.4 mm body incorporates 14 pole pairs, an anticorrosive stator, two 696ZZ bearings and centrifugal heat dissipation. The motor has IP45 protection and 150 mm black 16# AWG silicone leads. Construction specifications include a 180°C varnished wire grade, a 150°C magnet grade, rotor balance of ≤5 mg and motor balance of ≤10 mg.
The motor uses D:25 M3×4 mounting holes and offers propeller mounting patterns of D:12 M3×4, D:18 M3×4 and D:22 M3×4. Its shaft diameter is specified as IN: 6 mm. Installation requires clearance around the motor and matching motor and propeller mounting patterns. Each selected KV version must be paired with a suitable battery voltage, ESC and propeller; thrust and current assessment requires data for that exact combination. KV alone does not determine payload capacity or flight time.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity and purpose | MAD Antimatter M6C08 IPE V3 brushless motor for multirotor UAV propulsion |
| Motor model designation | MAD M6C08 IPE V3.0 |
| Available KV options | 130KV, 180KV, 260KV, 320KV |
| Motor dimensions | D:72 × 31.4 mm |
| Degree of protection | IP45 |
| Motor leads | 150 mm 16# Awg(Black) silicone |
| Number of pole pairs | 14 |
| Stator treatment | Anticorrosive |
| Varnished wire temperature grade | 180°C |
| Magnet temperature grade | 150°C |
| Centrifugal heat dissipation | Yes |
| Rotor balance | ≤5 mg |
| Motor balance | ≤10 mg |
| Propeller mounting holes | D:12 M3×4, D:18 M3×4, D:22 M3×4 |
| Shaft diameter | IN: 6 mm |
| Motor mounting holes | D:25 M3×4 |
| Bearings | 696ZZ*2 |
| Disruptive test voltage | 500 V |
| Propulsion integration | The selected KV version requires a suitable battery voltage, ESC and propeller. Thrust and current must be assessed for that exact combination; KV alone does not determine payload capacity or flight time.Selected KV version with its battery voltage, ESC and propeller combination. |
| Installation clearance and mounting | Allow installation clearance for the D:72 × 31.4 mm motor using its mounting drawing. |
| Mounting interface checks | Motor and propeller mounting patterns require checking before installation. |
Request a quote for Antimatter M6C08 IPE V3 Brushless Drone Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
