ChinaDrone.Request a quote ↗
COMPONENT

Kpower MM0160 16G Half-Aluminum Housing Metal Gear Brushed Micro Servo

By Kpower ↗

The Kpower MM0160 is a brushed micro servo for compact motion control in aircraft, drones, robots and other mechanisms. It combines metal gearing with a plastic-and-aluminum-alloy housing, supports digital and analog PWM, and specifies 2.5kg·cm stall torque at 6 V. Position feedback and stall protection are optional.

Request a quote ↗
Manufacturer and modelKpower MM0160 16G Half-Aluminum Housing Metal Gear Brushed Micro Servo
ApplicationsRC model aircraft, smart grippers, fishing bait boats and medical devices
Stall torque2.5kg·cm6 V
Speed0.12sec/60°6 V; no load
Travel angle180°Customization supported.
Voltage range3.7-6V

Product overview

The Kpower MM0160 16G Half-Aluminum Housing Metal Gear Brushed Micro Servo is a compact actuator for RC aircraft, drones, robots and smart-home mechanisms, with additional applications including smart grippers, fishing bait boats and medical devices. Its architecture combines a DC brushed motor, metal gears, a potentiometer position sensor and a plastic-and-aluminum-alloy case. The body measures 23x12x29mm, with a 25T, Φ4.9mm output spline and a 1BB bearing specification. Despite the 16G model designation, the specified weight is 14g.

Electrical integration uses a 3.7-6V supply and supports digital and analog PWM communication. At 6 V, the servo delivers 2.5kg·cm stall torque, with a no-load speed of 0.12sec/60° and stall current of 1200mA. Travel is specified as 180°, with customization supported for travel, signal protocol and ingress protection. The listed protection rating is IP42 and the operating temperature range is -10–50°C. Position feedback and stall protection are optional, making these functions configuration choices when specifying the actuator.

Specifications

SpecificationValue & conditions
Manufacturer and modelKpower MM0160 16G Half-Aluminum Housing Metal Gear Brushed Micro Servo
ApplicationsRC model aircraft, smart grippers, fishing bait boats and medical devices
Stall torque2.5kg·cm6 V
Speed0.12sec/60°6 V; no load
Travel angle180°Customization supported.
Voltage range3.7-6V
Dimensions23x12x29mm
Weight14g
Stall current1200mA6 V; stalled
Case materialPlastics + aluminum alloy
Gear materialMetal
Output spline25T Φ4.9mm
MotorDC brushed motor
Bearing1BB
Position sensorPotentiometer
Signal and protocolPWMCustomization supported.
PWM communication supportDigital and analog PWM communication
Ingress protectionIP42Customization supported.
Operating temperature-10–50°C
Position feedback and stall protectionOptional position feedback and stall protectionOptional equipment.
Potentiometer featureLong-life potentiometer
SOURCE WITH CHINADRONE

Request a quote for Kpower MM0160 16G Half-Aluminum Housing Metal Gear Brushed Micro Servo

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Mugin EV350 Airframe Kit 2026 Edition with fixed wing and twin-boom tail
Propellers & airframes

Mugin EV350 Airframe Kit 2026 Edition

By Mugin UAV

The Mugin EV350 Airframe Kit 2026 Edition is a carbon fiber composite VTOL UAV airframe for integrating propulsion, flight control and mission equipment. It retains the EV350 layout while revising manufacturing, assembly features and internal mounting provisions. Principal specifications include a 3500 mm wingspan, 6.5 kg typical weight and 25 kg design maximum takeoff weight.

GEPRC GEP-MX3 frame with black carbon arms and a silver aluminum camera cage
Propellers & airframes

GEP-MX3 Frame

By GEPRC

The GEPRC GEP-MX3 Frame is a compact True X airframe for 3-inch UAV builds. It combines carbon plate and a #7075 aluminum fuselage with two flight controller mounting patterns, camera protection and LED taillights. Its 139mm wheelbase supports a small build, with propulsion, controller and battery specifications given as recommended components.

Propellers & airframes

GEP-Vapor-X O4 Pro Frame

By GEPRC

The GEPRC GEP-Vapor-X O4 Pro Frame is a carbon fiber XH frame kit designed for DJI O4 Air Unit Pro integration. Vapor-X5 and Vapor-X6 versions support recommended 5-inch and 6-inch propellers respectively. Camera protection, vibration-damping silicone, multiple electronics mounting patterns and included assembly hardware define its build-focused configuration.