ChinaDrone.Request a quote ↗
COMPONENT

Kimpok SK1200

By Shenzhen Kimpok Technology Co., Ltd ↗

The Kimpok SK1200 is a compact 1.2GHz analog FPV video receiver module for drone video reception, goggles and ground stations. It offers eight channels across 1080-1360MHz, RSSI monitoring and SPI integration. Measuring 37×26.3×4.3mm and weighing 5.8g, it requires DC5V power and provides a U.FL/IPEX antenna connection.

Kimpok SK1200 FPV video receiver module, showing front and back views
Kimpok SK1200 FPV video receiver module, showing front and back views
Place of originShenzhen, China
BrandKimpok
ModelSK1200
CertificationCE certificate
Product typeAnalog video receiver module
Frequency band1.2G

Product overview

The Kimpok SK1200 is an analog video receiver module intended for long-distance drone FPV reception and environments prone to interference. Its receiving architecture uses analog FM demodulation, with eight selectable channels covering 1080-1360MHz in the 1.2GHz band. The module incorporates RSSI output for monitoring received signal strength and supports SPI communication for customization. These interfaces provide integration options for custom firmware, telemetry and control within an FPV receiving system, including goggles or ground stations.

The physical module measures 37×26.3×4.3mm and weighs 5.8g, providing a compact component for installations with limited space and weight allowance. Its electrical configuration requires DC5V power and uses a U.FL/IPEX antenna interface. The SK1200 is a receiver component for integration into other equipment. Sensitivity is specified inconsistently as 98dBm and −98dBm. Its stated reception capabilities include low-dropout video at 10+ km and resistance to multipath interference in complex terrain.

Specifications

SpecificationValue & conditions
Place of originShenzhen, China
BrandKimpok
ModelSK1200
CertificationCE certificate
Product typeAnalog video receiver module
Frequency band1.2G
Frequency range1080-1360MHz
Channels and interfaces8CH(RSSI SPI)
Power supplyDC5V
Receiving sensitivity, detail specification98dBm
Receiving sensitivity, feature specification−98dBm
Antenna interfaceU.FL/IPEX
Dimensions37*26.3*4.3mm
Weight5.8g
RSSI outputBuilt-in signal-strength output for real-time monitoring
SPI integrationSPI protocol support for open-source integration and customization
DemodulationAnalog FM demodulation for ultra-low latency
Integration locationsFPV goggles and ground stations
Long-range comparison1.2GHz band and −98dBm sensitivity are described as providing farther, more reliable video than 5.8GHz.
Compact installationCompact size and 5.8g weight support installation within FPV equipment.
Long-range video claimStable, low-dropout video at 10+ km rangesHeavy interference
Reception characteristicsPenetration and resistance to multipath interferenceComplex terrain

Ask for the Kimpok SK1200 price ↑

KEEP EXPLORING

Similar products

Browse all products ↗
RadioLink R8XM receiver with antenna, connector and output pins
Links & controllers

RadioLink R8XM

By RadioLink

The RadioLink R8XM is an eight-channel bidirectional telemetry receiver for FPV drone and aircraft integration. Its 22 × 17 mm, 3 g format provides simultaneous SBUS/PPM outputs and RSSI and voltage telemetry. Built-in battery monitoring supports 2S–6S (7.4–25.2 V) batteries without an additional telemetry module, provided the battery balance plug connects to the receiver port.

CLM920-TD3 wireless module shown from the front and back
Links & controllers

JND CLM920-TD3

By Shenzhen JND Technology Co., Ltd

The JND CLM920-TD3 from Shenzhen JND Technology Co., Ltd is an LCC-packaged wireless terminal module combining cellular communications and GPS positioning. Based on Qualcomm’s MDM9X07 chipset, it supports Cat4, uplink/downlink rates up to 50/150 Mbps, VoLTE, SRLTE, and Windows, Android and Linux operating systems.