Product overview
The Kimpok KP-T5825 provides analog FPV video transmission for RC drones, including racing applications, with a transmission distance of up to 20km. Its radio configuration spans 4.9GHz - 5.8GHz across 64 channels, with output selections of PIT, 25mW, 400mW, 800mW, 1500mW and 2500mW. For integration into a drone video system, it supports NTSC/PAL video and the VTX (IRC Tramp) control protocol. The hardware package comprises a transmitter, a separate antenna and a wiring lead.
The supplied configuration contains one BeastFPV 4.9-5.8GHz 64CH VTX, one 4.8-6GHz 3DBi RHCP antenna and one 6Pin SH1.0 wire. The transmitter uses an MMCCX antenna connector and accepts a 7-36V supply. Electrical integration must account for the specified current at the selected RF output: consumption is ≤450mA at 12V with 800mW output and ≤850mA at 12V with 2500mW output. These two current ratings apply to their stated power settings; the transmission-distance figure is an upper value of 20km.
Specifications
| Specification | Value & conditions |
|---|---|
| Place of origin | China |
| Brand | Kimpok |
| Model | KP-T5825 |
| Certification | CE |
| Product type | Wireless video transmitter |
| Video transmission distance | Up to 20km |
| Working voltage | 7-36V |
| Current consumption | ≤450mA@12V, 800mW; ≤850mA@12V, 2500mW12V supply; 800mW and 2500mW output respectively. |
| Output power settings | PIT/25mW/400mW/800mW/1500mW/2500mW |
| Frequency range | 4.9GHz - 5.8GHz |
| Channel count | 64CH |
| Antenna connector | MMCCX |
| Video format | NTSC/PAL |
| Transmitter control protocol | VTX (IRC Tramp) |
| Supplied configuration | VTX BeastFPV 4.9-5.8GHz 64CH × 1; 4.8-6GHz 3DBi RHCP antenna × 1; 6Pin SH1.0 wire × 1Included equipment. |
| Power input interface | 7-36V IN |
| Control input interface | DATA: VTX control input using IRC Tramp |
| Power output interface | 5V-OUT: 5V output |
| Video input interface | VIDEO: video signal input |
| Ground connections | Two GND connections, both negative ground |
| Power selection procedure | Hold the button for 6 seconds to enter adjustment mode; press once to advance through power levels.During button-based power adjustment. |
| Power indication | R1 flashes 1/2/3/4/5 times for 25/400/800/1500/2500mW respectively.During power selection. |
| Power setting save delay | 5 secondsAfter selecting an output power. |
| Indicator behavior | Red R1 indicator blinks; other indicators go out.During transmitter power adjustment. |
| Manufacturer and model | Kimpok KP-T5825 |
| Product type and application | Analog FPV video transmitter for racing drone and long-distance FPV applications |
| Number of channels | 64CH |
| Video transmitter protocol | VTX (IRC Tramp) |
