Product overview
The Jiangzhizai FB-80/200L Firefighting Bucket is a water-carrying drone payload for targeted fire suppression and coordinated aerial and ground operations. Its bucket capacity is 80L, with approximate weight of 11.5kg, diameter of 55cm and height of 51cm. The soft, foldable high-molecular nylon fabric body reduces storage volume by 60% and folds to less than 20cm high. One person can deploy it without tools or auxiliary equipment. A 10m sling and lowering system support airborne bucket exchange, with a stated exchange time of 10 seconds and less than 5 seconds between deliveries in that configuration.
PSDK provides the control interface, with DJI FC100, DJI FC200 and T100/T100S identified as compatible platforms. GPS positioning supports automatic opening and closing of the water intake port. The bucket uses top intake and one-key water discharge, and can connect directly to fire trucks or fire pumps for continuous water supply. Surface water intake takes within 3 seconds. Discharge response is described at millisecond level; the separate valve-opening response specification is ≤10s, with valve flow rate ≥15L/s. The nylon fabric has a material temperature range of -15°C to 60°C.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | FB-80/200L Firefighting Bucket |
| Diameter | 55cm |
| Height | 51cm |
| Material and construction | High-molecular nylon fabric; soft foldable; folded height less than 20cm |
| Bucket capacity | 80L |
| Weight | Approx. 11.5kg |
| Material temperature range | -15°C to 60°CMaterial temperature range. |
| Sling length | 10m |
| Valve release mode | On/Off |
| Control method | PSDK |
| Water intake method | Top intake |
| Valve opening response time | ≤10s |
| Valve flow rate | ≥15L/s |
| Discharge function | One-key water discharge |
| Compatible drone platforms | DJI FC100; DJI FC200; T100/T100S |
| Fire-area coverage per load | About 40m²With an 80L water load. |
| Firefighting efficiency | 8 times higherCompared with traditional methods. |
| Operation cycle | 3 minutesIncludes water intake, flight to the fire site and precise delivery. |
| Continuous water supply | Direct connection to fire trucks or fire pumps supports continuous water supply.Connected directly to a fire truck or fire pump. |
| Initial fire containment | Can contain fire spread within 15 minutes of initial ignition.Air-ground coordinated operations following initial ignition. |
| Bucket exchange time | 10 secondsEquipped with a lowering system; bucket exchange in the air. |
| Interval between deliveries | Less than 5 secondsEquipped with a lowering system; bucket exchange in the air. |
| Continuous operation support | 7×24 hour non-stop operation |
| Storage volume reduction | 60%Soft foldable structure. |
| Deployment | Rapid deployment by one personWithout tools or auxiliary equipment. |
| Water intake time | Within 3 secondsWater intake from the surface. |
| Discharge response | Millisecond-level discharge responseOne-key precise delivery. |
| Intake-port automation | GPS positioning supports automatic opening and closing of the water intake port.DJI drone integration through PSDK. |
| Material resistance | High-temperature-resistant and wear-resistantHigh-molecular nylon fabric bucket body. |
