ChinaDroneRequest a quote →

Huayi Aviation F20AM

The Huayi Aviation F20AM is an airspeed sensor module for UAV flight control, integrating a 32-bit MCU, static and total pressure sensors, and a four-sensor magnetic array. CAN communication delivers pressure and airspeed measurements, while magnetic sensing supports navigation calculations. Automatic output and redundant sensing simplify integration.

Huayi AviationPayloads & thermal cameras
Weight
90 g
Dimensions
107 mm×40 mm×20 mm

Get a free quote

Product overview

The Huayi Aviation F20AM airspeed sensor module brings pressure and magnetic sensing together for UAV flight control. Its integrated electronics comprise a 32-bit MCU, static pressure sensor, total pressure sensor and four-sensor magnetic array. Total pressure, static pressure and airspeed measurements are delivered over CAN, while geomagnetic flux measurements support navigation calculations. Pressure and airspeed data update at up to 40Hz, and magnetic measurements update at up to 100Hz. Output starts automatically after power-on without configuration.

The F20AM combines high-resolution pressure sensing with fused magnetic sensor data, providing barometric altitude measurement accuracy as fine as 10cm. Magnetic sensor redundancy automatically rejects abnormal readings when individual sensors encounter interference or fail. Its bus architecture supports multiple modules for redundant backup, and CAN communication permits installation away from interference sources. Measuring 107mm × 40mm × 20mm and weighing 90g, the compact module operates from -40°C to +60°C and supports relative humidity up to 95% at 25°C.

Cameras & sensors

Specifications

Huayi Aviation F20AM specifications
SpecificationValue & conditions
Product type and applicationHuayi Aviation F20AM airspeed sensor module for UAV flight control
Integrated electronics32-bit MCU, static pressure sensor and total pressure sensor
Communication and pressure outputsCAN bus output of total pressure, static pressure and airspeed measurements
Magnetic sensor arrayFour integrated magnetic sensors measure geomagnetic flux for navigation calculations
Barometric altitude measurement accuracyAs fine as 10cm
Magnetic data processingArray-based magnetic sensing with data fusion before output
Magnetic sensor redundancyAutomatically rejects abnormal values and outputs correct measurementsWhen some magnetic sensors experience interference or failure.
Module redundancyBus architecture supports multiple modules for redundant backup
Installation flexibilityInterference-resistant CAN communication supports installation away from interference sources without affecting signal transmission
Automatic outputAutomatic data output without configurationAfter power-on.
Pressure and airspeed update rateUp to 40Hz
Magnetic measurement update rateUp to 100Hz
Pressure sensor range10~1300mbar
Pressure sensor ADC24-bit
Pressure resolution0.012mbar
Pressure sensor response time8.22ms
Temperature measurement resolution0.1°C
Temperature measurement accuracy±0.8°C
Magnetic sensor range2gauss
Magnetic sensor sensitivity0.08mgauss
Magnetic sensor output frequency100Hz
Operating temperature-40°C~+60°C
Storage temperature-40°C~+75°C
Relative humidity≤95%At 25°C.
Dimensions107mm×40mm×20mm
Weight90g
Integration characteristicsCompact, lightweight, low-power module designed for installation and integration

Related guides