XRotor 6 Series Power Combo for Agriculutral Drones

Product overview

The HOBBYWING XRotor 6 Series Power Combo for Agriculutral Drones combines an XRotor PRO 6215 180KV motor, XRotor PRO 80A HV FOC V4 ESC and XRotor PRO 2388 propeller for agricultural propulsion. It is a propulsion assembly for integration into a drone. The 23-inch composite propeller folds and has replaceable blades. Recommended takeoff weight is 3.5kg-5kg per axis, while maximum thrust is 12kg per axis at 48V. The recommended battery is 12S LiPo, and the complete combo weighs approximately 502.5g.

Installation provisions include threaded holes and slots in the ESC heatsink housing, M3 propeller mounting holes and M4 motor holder mounting holes. The motor measures 69mm in outer diameter; the ESC occupies 83.5x35x19.4mm. Motor wiring uses glassfiber insulation and 4mm bullet connectors, while the ESC has 12AWG input and 14AWG output wires. Its control interface accepts 1100us-1940us pulses at 50-500Hz. The ESC has no BEC, so integration must account for that power provision. Its 80A maximum input current requires heat dissipation, and maximum input voltage is 52.2V.

The assembly carries an IPX7 waterproof rating and an operating temperature range of -20~65℃. Its protective construction includes a waterproof ESC heatsink housing, waterproof motor bearings and shaft structure, coated windings, and corrosion-treated stator and rotor magnet steel. Copper bars transfer ESC heat to the housing, while the motor rotor incorporates a centrifugal fan. The FOC ESC provides operating data including throttle, RPM, electrical readings and temperatures, with startup, voltage, overcurrent and motor lock-up protections. Firmware upgrades require Hobbywing USB LINK software, a laptop and a separately sold LCD program box.

Specifications