Product overview
The HOBBYWING X11 G2 is an integrated propulsion assembly combining an ESC, motor and propeller. Its procurement role is to provide propulsion hardware for an aircraft build, rather than a complete flight platform or an airframe-only kit. The manufacturer identifies agriculture, education and training, logistics, firefighting, surveying and inspection as application areas, and describes suitability for various 30 L agricultural drones and Class IV UAVs. The specified architecture pairs a 11115 motor with an MFP 43x14 folding propeller made from carbon fibre-reinforced nylon composite.
Mechanical integration centers on a published D45 mm tube interface and a motor diameter of 120.1 mm, with a separately listed 138 mm fan diameter. These manufacturer dimensions should be confirmed for the selected configuration. Published assembly weight is 1980 g including cable and propeller, subject to the actual product. The power lead is 12AWG and 1050 mm long, while the signal lead is 1090 mm long; both lengths carry the same actual-product qualification. Electrical planning should account for the specified 14S LiPo battery and 18–63 V input range.
Control integration provides PWM and CAN throttle sources, with HWCAN identified as the default alongside DroneCAN support; the ESC table separately names Cyphal (UAVCAN). Buyers should confirm the intended firmware and controller configuration. Throttle range calibration is listed as unsupported. Mobile adjustment requires DataLinkBox G3 and the DataLink V3 app, with Huawei HarmonyOS currently unsupported and accessory inclusion unestablished. The 32 kg maximum thrust and 17 kg recommended takeoff weight per axis apply at sea level. They should be assessed alongside the distinct continuous ratings, rather than treated as guaranteed aircraft performance.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity and purpose | HOBBYWING X11 G2 integrated ESC, motor and propeller propulsion system for agriculture, education and training, logistics, firefighting, surveying and inspection.Application scope. |
| Physical architecture and intended integration | 11115 motor paired with an MFP 43x14 propeller; intended for integration into various 30 L agricultural drones and Class IV UAVs.Manufacturer describes suitability for various 30 L agricultural drones and Class IV UAVs; confirm the selected aircraft integration. |
| Maximum thrust | 32 kgAt sea level. |
| Recommended takeoff weight per axis | 17 kgAt sea level; recommendation per propulsion axis, not total aircraft takeoff weight. |
| Efficiency at recommended takeoff weight | 7.5 g/WAt the recommended takeoff weight. |
| Compatible lithium battery | 14S LiPo |
| Rated voltage, system and ESC | System: 14S–54 V; ESC: 14 S.System specification lists 14S–54 V; ESC specification separately lists 14 S. |
| Input voltage | 18–63 V |
| Tube outer diameter | D45 mmTube interface dimension. |
| System weight | 1980 g*Includes cable and propeller; asterisk denotes subject to the actual product. |
| Cable specification | Power cable: 12AWG, 1050 mm*; signal cable: 1090 mm*.Asterisks denote subject to the actual product. |
| Operating temperature | -20–50 °C |
| Ingress protection | IPX6 |
| Rated output power | 1870 W, maximum continuous.Rated output power is specified as maximum continuous. |
| Pinout |
|
| DataLink version | DataLinkBox G3Listed DataLink version. |
| ESC communication protocol | Cyphal (UAVCAN)ESC specification terminology; confirm protocol selection for the intended controller. |
| ESC peak current | 150 A, 3 s.Peak current rating applies for 3 seconds. |
| ESC continuous current | 60 A |
| Throttle range calibration | Not supported |
| Throttle source | PWM + CANManufacturer describes PWM analog and CAN digital throttle inputs. |
| Operating pulse width | 1050–1950 μs |
| Fault storage and logging | Supported |
| Motor KV | 95 KV |
| Motor slots and poles | 36N40P |
| Stator dimensions | 111 × 15 mmPublished under the stator diameter heading; preserve both dimensions and |
| Motor diameter | 120.1 mm; fan: 138 mm.Motor diameter and fan diameter are separately specified. |
| Propeller configuration, material and weights | MFP 43x14 folding propeller; carbon fibre-reinforced nylon composite; total weight: 427 g*; single weight: 146 g*.Asterisks on both weights denote subject to the actual product; total and single weights are separate published entries. |
| Supported CAN protocols and default | DroneCAN and HWCAN; default: HWCAN.HWCAN is the stated default; the ESC table separately uses Cyphal (UAVCAN) terminology. Confirm firmware and controller configuration. |
| Mobile parameter adjustment | Bluetooth adjustment of 90% of ESC parameters using DataLinkBox G3 with HOBBYWING DataLink V3.Bluetooth configuration requires DataLinkBox G3 and the HOBBYWING DataLink V3 app; Android and iOS are supported, Huawei HarmonyOS is currently unsupported. |
Request a quote for HOBBYWING X11 G2
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
