ChinaDrone.Request a quote ↗
COMPONENT

HOBBYWING Platinum 80A V5

By HOBBYWING ↗

The HOBBYWING Platinum 80A V5 is an 80A continuous, 120A peak brushless ESC for 325-420 class electric helicopters with 325-420mm main blades and small or medium electric fixed-wing aircraft. It combines a programmable switch-mode BEC, airflow-assisted cooling, governor control and telemetry, with dedicated programming access and specified power and motor wiring.

Request a quote ↗
HOBBYWING Platinum 80A V5 electronic speed controller with finned housing and attached wires.
HOBBYWING Platinum 80A V5 electronic speed controller with finned housing and attached wires.
HOBBYWING Platinum 80A V5 electronic speed controller with heat sink and attached wires.
HOBBYWING Platinum 80A V5 electronic speed controller with heat sink and attached wires.
Input3-8S LiPoFor the Platinum 80A V5.
Listed applications325-420 class electric helicopter or fixed-wing aircraftListed helicopter main blade length: 325-420 mm.
ModelPlatinum 80A V5
Product number30203201
Controller typeBrushless; standard-voltage category
Continuous / peak current80A / 120A

Product overview

The HOBBYWING Platinum 80A V5, product number 30203201, is a standard-voltage brushless electronic speed controller for 325-420 class electric helicopters with 325-420mm main rotor blades, and small or medium electric fixed-wing aircraft. Its body measures 60.5 × 33 × 17.6mm excluding the fan and weighs 77.5g including wires but excluding the fan. The PLATINUM V5 cooling structure uses airflow generated during aircraft movement. Control electronics combine a 32-bit processor, an optimized governor algorithm and synchronous rectification.

The controller accepts 3-8S LiPo batteries and is rated at 80A continuous and 120A peak. Supplied wiring comprises one red and one black 12AWG power lead, each 100mm long, plus three black 14AWG output leads of 100mm each. It has no power connector; the output connectors are 3.5mm female gold connectors. Its built-in programmable switch-mode BEC adjusts from 5-12V, with an output rating of 8A continuous and 20A momentary. A separate BEC maximum-output figure is up to 25A.

Configuration interfaces include a dedicated programming port, support for an LCD programming box and an OTA Bluetooth wireless module, and online firmware upgrades. Transmitter parameter programming, LED setting cards and LED programming boxes are unsupported. Telemetry supports Mikado VBar and Futaba S.Bus2, with remote parameter adjustment supported through the VBar protocol. Protective functions address startup, current, temperature, overload, loss of the throttle signal, capacitor temperature and abnormal input voltage. These functions accompany the controller’s motor-control and onboard BEC hardware.

Specifications

SpecificationValue & conditions
Input3-8S LiPoFor the Platinum 80A V5.
Listed applications325-420 class electric helicopter or fixed-wing aircraftListed helicopter main blade length: 325-420 mm.
ModelPlatinum 80A V5
Product number30203201
Controller typeBrushless; standard-voltage category
Continuous / peak current80A / 120A
Battery compatibility3-8S LiPo
BEC output rating5-12V; 8A continuous, 20A momentarySwitch-mode BEC.
BEC adjustment and maximum output5-12V adjustable; maximum output voltage 12V; output current up to 25ABuilt-in programmable switch-mode BEC.
Power leadsOne red 12AWG × 100mm lead and one black 12AWG × 100mm lead
Output leadsThree black 14AWG × 100mm leads
Power connectorNo connector
Output connectors3.5mm female gold connectors
Transmitter parameter programmingNot supported
LED setting-card programmingNot supported
LED programming-box programmingNot supported
LCD programming-box programmingSupported
OTA Bluetooth wireless moduleSupported
Programming interfaceDedicated programming port
Online firmware upgradesSupported
Telemetry protocolsSupports Mikado VBar, Futaba S.Bus2 and other telemetry protocols
Remote parameter adjustmentSupports parameter adjustment through remote control equipmentVBar protocol.
Dimensions60.5 × 33 × 17.6mmExcluding fan.
Weight77.5gIncluding wires; excluding fan.
Applications325-420 class electric helicopters; small and medium electric fixed-wing aircraftHelicopter main rotor blade length: 325-420mm.
Cooling architecturePLATINUM V5-series cooling structure uses airflow from aircraft movementAirflow generated during aircraft movement.
Processor and governor32-bit processor with an optimized speed-governing algorithm
Drive technologySynchronous rectification with drive-efficiency optimization
Protection functionsStartup, current, temperature, overload, throttle-signal loss, capacitor-temperature and abnormal input-voltage protection
SOURCE WITH CHINADRONE

Request a quote for HOBBYWING Platinum 80A V5

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
T-MOTOR V13L KV65 VTOL drone motor with black housing and three attached wires.
Motors & ESCs

T-MOTOR V13L KV65 VTOL drone motor

By T-MOTOR

The T-MOTOR V13L KV65 is a 24S brushless motor for heavy-lift VTOL UAV propulsion. Its published specifications define the motor envelope, cable-inclusive mass, electrical ratings and recommended propeller and ESC. Package contents require confirmation, and the manufacturer's bench-test results carry reference-only and measurement-condition qualifications.

GEPRC G2523 2.5-inch three-blade propellers in green, red, black and blue
Motors & ESCs

GEPRC G2523 2.5” Props Propeller

By GEPRC

The GEPRC G2523 2.5” Props Propeller is a polycarbonate propeller set for racing and freestyle flight. It has a 2.5 inch length, 2.3 inch pitch, T-style M2 hub and specified weight of 1.1g. The supplied configuration includes four clockwise and four counterclockwise propellers, with four color choices.

MAD Components 9X12-II Coaxial Drone Arm Set with stacked motors and two propellers
Motors & ESCs

9X12-II Coaxial Drone Arm Set

By MAD Components

The MAD 9X12-II Coaxial Drone Arm Set provides coaxial propulsion for industrial multirotors, with specified thrust of 8-10kgF/rotor and maximum thrust of 19.9kgF/rotor. It offers opposing top/bottom rotation configurations, two propeller sizes, selectable LED colors, and field-oriented control.