Product overview
The T-MOTOR V13L KV65 is a brushless propulsion motor presented for heavy-lift VTOL UAVs. The listed hardware is a motor component, with a 42N38P configuration and KV65 designation. Its published envelope is φ144.2 × 78.1mm, and its 1680g weight includes the cable. These figures inform installation space and mass allocation, subject to confirmation of the selected configuration. The shaft specification reads IN20 OUT12 without stated units, while the electrical leads are straight-out enamelled wire measuring 150mm.
Electrical integration is specified around a 24S LiPo supply with a maximum voltage of 104V. The manufacturer lists 6000W maximum continuous power, 190A peak current for 15s, internal resistance of 26±2mΩ, and 3A idle current measured at 20V. IPX5 is the published ingress-protection rating. T-MOTOR recommends the VZ42 × 16.5” propeller and THUNDER 200A 24S ESC. These recommendations identify components to assess during integration; its packing-list section provides no itemized contents.
The product title describes a 55kg-thrust application, but procurement assessment should retain the qualifications attached to the performance evidence. The published bench table uses a V13L KV65 at 100V with the VZ42 × 16.5” propeller. The manufacturer labels those results as reference-only and discourages comparison with other motor types. Its temperature note specifies motor surface temperature after 30s at 75% throttle. Those measurement conditions and the separate continuous-power and 15s peak-current ratings should remain explicit when evaluating the motor for an installation.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer, model and purpose | T-MOTOR V13L KV65 VTOL drone motor, presented for heavy-lift UAV propulsion.And application description. The title's 55kg thrust description is not a continuous-thrust rating. |
| Motor type | 24S brushless VTOL drone motor. |
| KV | 65 |
| Motor size | φ144.2 × 78.1mm |
| Shaft diameter | IN20 OUT12The shaft-diameter row does not state units. |
| Motor weight including cable | 1680gPublished mass includes the cable. |
| Idle current | 3AIdle current specified at 20V. |
| Motor configuration | 42N38P |
| Internal resistance | 26±2mΩ |
| Lead specification | Straight-out enamelled wire, 150mm. |
| Ingress protection | IPX5 |
| Rated voltage | 24S LiPo; maximum 104V.Published for a LiPo supply; maximum voltage is 104V. |
| Peak current | 190APeak-current rating applies to a 15s duration. |
| Recommended propeller | VZ42 × 16.5”Manufacturer recommendation; inclusion in the supplied package is not established. |
| Maximum continuous power | 6000W |
| Recommended ESC | THUNDER 200A 24SManufacturer recommendation; inclusion in the supplied package is not established. |
| Bench-test configuration | V13L KV65 tested at 100V with a VZ42 × 16.5” propeller.Published bench-test configuration. Results are reference values, and the manufacturer discourages comparison with other motor types. |
| Performance-data qualification | Bench-test data are for reference only; comparison with other motor types is not recommended.Applies to the published bench-test results. |
| Temperature measurement | Motor surface temperature at 75% throttle after 30s.Temperature is defined as motor surface temperature after running for 30s at 75% throttle. The table supplies the qualitative entry HOT rather than a numeric temperature. |
| Supplied-package documentation | Package contents require confirmation. |
Request a quote for T-MOTOR V13L KV65 VTOL drone motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
