Product overview
The HOBBYWING MFP 18x6.0 is an industrial folding propeller for drone propulsion. Its physical architecture combines carbon fiber reinforced polymer blades with an aluminum alloy propeller adapter and a matte frosted surface. HOBBYWING describes 40% carbon fiber content, upturned blades, anhedral tips and a large aspect ratio, presenting these features as part of its aerodynamic and structural design. The published 39g assembly weight includes the adapter.
For integration, HOBBYWING recommends its M6208 and X6 SE motors. These recommendations provide a starting point for motor selection. The specification table identifies an optimal speed range of 3100–6300RPM and a commonly used thrust range of 1–4.5kg. Maximum thrust is published as 6.6kg, without a stated motor, electrical input or measurement setup, so these figures require confirmation for the intended propulsion configuration.
Procurement review should retain configuration and performance qualifications. The specification table lists 7650RPM maximum speed, while promotional text links 6.6kg thrust to 7600RPM; a repeated promotional section also gives 33g instead of the table’s 39g including the adapter. Published operation is limited to -20°C through 50°C, with storage at -10°C through 35°C and humidity below 85%. HOBBYWING reports balancing and fatigue testing, including testing at -40°C.
Specifications
| Specification | Value & conditions |
|---|---|
| Product name | HOBBYWING MFP 18x6.0 |
| Product type | Industrial carbon plastic folding propellerA propeller component. |
| Propeller size | 18 inchNominal size. |
| Total weight | 39g, including propeller adapterIncludes the propeller adapter. The specification table states 39g; a repeated promotional section states 33g without explaining the difference. |
| Main material | Carbon fiber reinforced polymer |
| Surface finish | Matte frosted |
| Propeller adapter material | Aluminum alloy |
| Operating temperature | -20°C to 50°CPublished operating range. The separately stated fatigue testing at -40°C does not extend this operating specification. |
| Storage temperature | -10°C to 35°C |
| Storage humidity | Less than 85% |
| Optimal speed range | 3100–6300RPMManufacturer-designated optimal range. |
| Commonly used thrust range | 1–4.5kgPublished commonly used thrust range. |
| Maximum rotational speed | 7650RPMThe specification table states 7650RPM; promotional text associates maximum thrust with 7600RPM. Confirm this discrepancy for the selected configuration. |
| Maximum thrust | 6.6kgPromotional text associates 6.6kg thrust with 7600RPM, while the table lists maximum speed as 7650RPM. |
| Folding configuration | Folding |
| Recommended HOBBYWING motors | M6208 / X6 SEManufacturer recommendations. |
| Carbon fiber content | 40% carbon fiberThe composition statement does not specify whether the percentage is measured by mass or volume. |
| Blade architecture | Upturned blade, anhedral blade tip and large aspect ratioBlade geometry. |
| Weight balancing | Weight balancing tests on each propellerQuality-control process. |
| Fatigue life testing | More than 1000 hoursTesting duration; it is not a stated service-life guarantee. |
| Low-temperature fatigue testing | More than 200 hours at -40°CFatigue testing at -40°C; the published operating range remains -20°C to 50°C. |
Request a quote for HOBBYWING MFP 18x6.0
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
