The Herewin Lead-to-Lithium Battery JW1220 is a battery product with a specified voltage of 12.8V and capacity of 24AH (307.2WH). Its physical dimensions are 176 × 166 × 125mm, providing the size information for installation planning.
Get a free sourcing quote for Herewin Lead-to-Lithium Battery JW1220
The Herewin JW1220 is a lead-to-lithium battery with a voltage of 12.8V. Its capacity is 24AH, with an associated energy figure of 307.2WH.
The battery measures 176 × 166 × 125mm. These dimensions define its physical size for installation planning, alongside the electrical specification of 12.8V and 24AH.
| Specification | Value & conditions |
|---|---|
| Product identity | Herewin Lead-to-Lithium Battery JW1220 |
| Voltage | 12.8V |
| Size | 176*166*125mm |
| Capacity | 24AH (307.2WH) |
The WESbattery 66000mAh is a semi-solid-state UAV battery for heavy logistics, agricultural spraying and surveying. Its 23.7V 6S1P configuration provides 3C continuous and 10C short-duration discharge. The pack measures 65 × 165 × 243 mm, weighs 5180 g and supports airframe-specific customization of dimensions, BMS protocols and connectors.
The ToolkitRC ADP450 is an AC-to-DC power supply for compatible ToolkitRC chargers.
The RadioLink CM210 is a portable balance charger for 2S lithium batteries used in small aircraft and model vehicles. Its 5 g body combines USB Type-C 5 V DC input, adaptive charging current, series charging and bypass balancing. The package includes the charger, a Type-C cable and a packaging bag.
DJI Power 2000 combines a 2048 Wh LFP battery with AC, USB and SDC connections for equipment power and accessory-based drone battery charging. The DYM2000H unit weighs approximately 22 kg. Its SDC interfaces support charging and capacity expansion, with accessory, temperature and connection requirements governing available functions and power.
The Holybro PM07 combines a power module and power distribution board, supplying regulated flight-controller power, analog battery monitoring and power and signal distribution for up to eight ESCs. It includes pre-soldered wires, a capacitor and an XT60 connector. Integration must account for supplied wiring current limits and separate servo-rail power requirements.
The Grepow iCheck B36 Smart RC Battery Checker is a portable battery service device for drone operators and RC applications. It combines 1–8S lithium battery monitoring, cell balancing and USB charging in an approximately 75g unit, with G-Tech battery recognition, a 2.4-inch IPS display and communication signal testing.
DJI Matrice 4 Series batteries require a Matrice 4 Series charging hub.
A lithium battery pack for industrial heavy-duty drones.
Zhuoxun Intelligent Technology (Henan) Co., Ltd’s 6S 28000mAh Solid-State UAV Battery supplies 621.6wh at a nominal 22.2v for industrial UAV applications. The 2.03kg battery combines six-face carbon-fiber protection with configurable connectors and customization options. Its specified charge and discharge rates are 1C and 10C, with a listed cycle life of 1000 cycles.
The Zhengzhou Zhengfang Technology 19S60Ah High-Rate Solid-State UAV Battery is intended for heavy-lift logistics UAVs. This battery component has a nominal voltage of 71.25V and combines a solid-state designation with high-rate capability for its stated UAV application.