Product overview
DJI Power 2000 supplies electrical equipment from a 2048 Wh LFP battery and supports drone battery charging through corresponding SDC fast-charging cables. The DYM2000H unit weighs approximately 22 kg and measures 448 mm long, 225 mm wide and 324 mm high. Its connection layout comprises four AC outputs, four USB-C ports, four USB-A ports, two SDC ports and one AC input. DYM2000H AC output is rated at 220–240 V, 13.6 A and 50/60 Hz; AC output specifications vary by country or region.
Integration through the two SDC ports covers accessory-based charging, capacity expansion and power delivery. Up to ten DJI Power Expansion Battery 2000 units can expand capacity to 22 kWh. Simultaneous AC and DC charging supports up to 2200 W for the main unit or 3000 W with an expansion battery connected. USB-C ports C1 and C2 each support up to 140 W with PD 3.1 equipment and USB EPR-compliant cables; C3 and C4 each support up to 65 W. Charging requires 0–45°C ambient conditions, low temperatures reduce input and output power, and drone batteries should cool after flight before fast charging.
Specifications
| Specification | Value & conditions |
|---|---|
| Hardware model | DYM2000H |
| Battery chemistry | LFP (lithium iron phosphate) |
| Battery capacity | 2048 Wh |
| Cycle life | At least 80% capacity retained after 4000 cyclesMeasured at 25°C in a laboratory, charging in normal mode and discharging at 2000 W; one cycle means one complete charge and discharge. |
| Net weight | Approximately 22 kg |
| Dimensions | 448 × 225 × 324 mm (length × width × height) |
| Port configuration | 4 AC outputs; 4 USB-C ports; 4 USB-A ports; 2 SDC ports; 1 AC input |
| Maximum operating altitude | 5000 m |
| AC output | 220–240 V AC, 13.6 A, 50/60 HzDYM2000H configuration; AC output specifications vary by country or region. |
| Bypass AC output | 220–240 V AC, 10 ADYM2000H in bypass mode. |
| USB-A output | 5 V/3 A; 9 V/2 A; 12 V/2 A; maximum 24 W per portQC 2.0 and QC 3.0 support and maximum 24 W require a single connected USB-A port. With two or more connected ports, each defaults to 5 V/2 A/10 W without higher-voltage negotiation. |
| USB-C output profiles | 5, 9, 12, 15, 20 or 28 V at 5 A28 V uses EPR; maximum 140 W requires a PD 3.1 device and a USB EPR-compliant cable. |
| USB-C port power limits | C1 and C2: maximum 140 W each; C3 and C4: maximum 65 W eachPorts numbered from left to right; 140 W requires a PD 3.1 device and USB EPR-compliant cable. |
| SDC output | 9–28 V, maximum 12 ASDC 1 and SDC 2 ports. |
| AC input | 220–240 V AC, maximum 10 ADYM2000H configuration. |
| SDC input | 32–58.4 V DC, maximum 60 ASDC 1 and SDC 2 ports. |
| Power-supply ambient temperature | -10°C to 45°CWhile supplying power. |
| Charging ambient temperature | 0°C to 45°CWhile charging. |
| Storage ambient temperature | -10°C to 45°CDuring storage. |
| Wi-Fi | 802.11 b/g/n; 2.4000–2.4835 GHz; EIRP less than 20 dBmFCC/CE/SRRC/MIC; supported operating bands and usable ranges vary by country or region. |
| Bluetooth | Bluetooth 5.0; 2.4000–2.4835 GHz; EIRP less than 7 dBmSupported operating bands and usable ranges vary by country or region. |
| Combined charging power | Maximum 2200 W for the main unit alone; maximum 3000 W with an expansion batterySimultaneous DC and AC charging; the higher limit requires a connected expansion battery. |
| Capacity expansion | Up to 10 expansion batteries; total capacity expandable to 22 kWhWith DJI Power Expansion Battery 2000 units. |
| Drone battery charging | Fast charging for intelligent flight batteries of DJI Matrice 4, Mavic 3, Air 3, Matrice M30 and Matrice 4D series, and Inspire 3Using the corresponding drone battery fast-charging cable through SDC. |
| Cold-weather limitation | Charging and discharging capability is affected; input and output power decreaseLow-temperature operation. |
| Battery cooling requirement | Allow the drone battery to cool before connecting the corresponding SDC fast-charging cable; otherwise charging speed may be affectedDrone battery fast charging after flight. |
Request a quote for DJI Power 2000
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
