ChinaDroneRequest a quote →
AMPX ESC 120A (12-24S) electronic speed controller with black finned housing and attached wiresAMPX ESC 120A (12-24S) electronic speed controller with black finned housing and attached wires

Gesai AMPX ESC 120A (12-24S)

The Gesai AMPX ESC 120A (12-24S) is a high-voltage drone electronic speed controller for 12~24S lithium battery systems. It combines CAN and PWM throttle control, a dedicated disc-motor control algorithm, RPM and error-signal outputs, and electrical isolation between the control signal interface and main power supply.

GesaiDrone ESC

Get a free quote

Product overview

The Gesai AMPX ESC 120A (12-24S) is a high-voltage drone electronic speed controller with a dedicated control algorithm for disc motors. It accepts CAN digital and PWM analog throttle commands, giving CAN priority, and supports 3.3V/5V PWM input signals. Its CAN interface enables real-time communication with compatible flight control, while RPM and error-signal outputs provide additional interfaces. The controller supports 12~24S lithium batteries, has a 120A current limit, and reaches full motor speed from startup in 0.60 seconds.

The controller measures 117.5*56.3*42.8mm and incorporates 8AWG power wire with a 190mm length. Mounting screw holes allow installation without consideration of ESC orientation, and the control signal interface is fully isolated from the main power supply. The operating environment range is -20~65°C. Protection functions cover short circuits, stalls, voltage, temperature, throttle loss and failed startup. Voltage protection blocks motor startup below 40V or above 105V and is disabled during flight. Throttle calibration provides audio feedback for successful setup.

Motors & ESCs

Specifications

Gesai AMPX ESC 120A (12-24S) specifications
SpecificationValue & conditions
BrandGS
Model numberAMPX ESC 120A (12-24S)
ModelAMPX 120A HV ESC
Product typeHV drone electronic speed controller
PWM input signal voltage3.3V/5V (compatible)
Power wire / wire length8AWG/190mm
Supported lithium cell count12~24S
Dimensions (L*W*H)117.5*56.3*42.8mm
Operating environment temperature-20~65°C
Current limit120A
Throttle controlCAN digital throttle and PWM analog throttle, with CAN digital throttle taking priority
Response time0.60 secondsFrom motor start to full speed operation.
Motor control algorithmSpecial control algorithm for disc motors
Output interfacesRPM and error signal
CAN communicationCAN interface for real-time communication with flight controlRequires compatible flight control.
MountingScrew holes allow installation without consideration of ESC orientation
Electrical isolationFully isolated control signal interface and main power supply
Short circuit protectionESC shuts down output and automatically restarts after 100msWhen short circuit protection is triggered.
Stall protectionRequires throttle return to zero and re-advance to restore operationAfter stall protection is triggered.
Voltage protectionPrevents motor start if battery voltage is below 40V or above 105VDisabled during flight.
Temperature protectionReduces output power at 125°C, cuts output at 140°C, and restores output when temperature drops to 80°C
Throttle loss protectionCuts power and restores it when the signal returnsThrottle signal lost for more than 2 seconds.
Startup protectionShuts down outputMotor does not start within 10 seconds of throttle increase.
Throttle calibrationCalibration procedure with audio feedback for successful setupDuring throttle calibration.

Related guides