Product overview
The Gesai AMPX ESC 150A (5-14S) is a drone electronic speed controller incorporating a dedicated algorithm for disc motor control. Its electrical specifications combine a 150A current limit with support for 5~14S lithium batteries and 3.3V/5V PWM input signals. Measuring 98.0 × 50.0 × 27.9mm, the controller is equipped with 800mm of 10AWG power wire. It operates in ambient temperatures of -20~65°C and accelerates from start to full speed in 0.25 seconds.
The controller uses synchronous freewheeling to make throttle response more linear and improve driving efficiency, with energy recovered automatically as the motor slows. Its CAN connection exchanges information in real time with a compatible flight control system. To calibrate the throttle, power on at the maximum setting and select minimum after the confirmation beeps. A throttle signal interruption lasting 2 seconds cuts power until the signal returns; an unsuccessful motor start stops output 10 seconds after a throttle increase.
Protection functions govern recovery as well as shutdown. A short circuit interrupts output, followed by an automatic restart after 100ms; recovery from a detected stall requires a zero throttle setting. Battery voltage below 16V or above 64V blocks motor startup, with this protection disabled during flight. Thermal protection lowers output power at 125°C and stops it at 140°C. Once cooling brings the temperature down to 80°C, the controller restores output gradually.



