ChinaDroneRequest a quote →

Gesai AMPX ESC 150A (12-24S

The GS AMPX ESC 150A (12-24S) drone electronic speed controller supports 12~24S lithium batteries and a 150A current limit. It combines CAN and PWM throttle control, a dedicated disc-motor algorithm, isolated signal and power interfaces, RPM and error outputs, and protection functions for motor operation.

GesaiDrone ESC

Get a free quote

Product overview

The GS AMPX ESC 150A (12-24S) is a drone electronic speed controller with a dedicated control algorithm for disc motors. It supports CAN digital and PWM analog throttle control, with priority given to CAN, and accepts 3.3V/5V PWM input signals. Supporting 12~24S lithium batteries, it has a 150A current limit and reaches full speed in 0.60 seconds from motor start. Synchronous freewheeling improves throttle linearity and driving efficiency while enabling automatic energy recovery during motor speed reduction.

The controller measures 176.0 × 73.0 × 42.8mm and features 7AWG power wire with a 200mm length. Mounting screw holes allow installation without an ESC orientation requirement, while the control signal interface and main power supply are fully isolated. Connections include RPM and error signal outputs and a CAN communication interface for real-time communication with compatible flight control. The operating environment temperature range is -20 to 65°C. A one-year warranty is included.

Protection functions cover short circuits, motor stalls, voltage, temperature, throttle loss and unsuccessful startup. Battery voltage below 40V or above 105V prevents motor start at power-up; voltage protection is disabled during flight. Thermal protection reduces output to 50% at 125°C and cuts output at 140°C; operation resumes below 80°C after throttle reset. Throttle loss exceeding 2 seconds cuts power until the signal returns. Short-circuit recovery requires troubleshooting and a power cycle; stall recovery requires returning throttle to zero and advancing it again. Failure to start within 10 seconds of throttle increase shuts down output and requires throttle reset.

Motors & ESCs

Specifications

Gesai AMPX ESC 150A (12-24S specifications
SpecificationValue & conditions
BrandGS
ModelAMPX 150A HV ESC
Product typeDrone Electronic Speed Controller (ESC)
PWM input signal voltage3.3V/5V (compatible)
Power wire / wire length7AWG/200mm
Supported lithium cell count12~24S
Dimensions (L*W*H)176.0*73.0*42.8mm
Operating environment temperature-20-65°C
Current limit150A
Throttle controlCAN digital throttle and PWM analog throttle, with CAN digital throttle priority.
Speed response0.60 secondsFrom motor start to full speed.
Motor control algorithmSpecial control algorithm for disc motors.
Synchronous freewheelingImproves throttle linearity and driving efficiency and enables automatic energy recovery.Energy recovery during motor speed reduction.
Output interfacesRPM and error signal output interfaces.
CAN communicationCAN interface for real-time communication with flight control.Requires compatible flight control.
MountingScrew-hole mounting without an ESC orientation requirement.
Electrical isolationFully isolated control signal interface and main power supply.
Short circuit protectionShuts down output. A power cycle is required after troubleshooting to restore operation.When the ESC detects a short circuit.
Stall protectionThrottle must be returned to zero and advanced again to restore operation.If motor stall is detected.
Voltage protectionPrevents motor start if battery voltage is below 40V or above 105V.At power-up; disabled during flight.
Temperature protectionReduces output to 50% at 125°C and cuts output at 140°C.Normal operation resumes when temperature drops below 80°C after throttle reset.
Throttle loss protectionCuts power and restores power when the signal returns.If the throttle signal is lost for more than 2 seconds.
Startup protectionShuts down output; requires throttle reset to restore.If the motor does not start within 10 seconds of throttle increase.
Throttle calibrationSet throttle to maximum and power up. After two beeps, set throttle to minimum. The "DO Mi SO" sound confirms successful calibration.Motor connected.
Included warranty1 year

Related guides