Product overview
The GEPRC TAKER H743 BT Flight Controller combines an STM32H743 processor with MPU6000 and ICM42688-P dual gyroscopes, an integrated barometer and 512M of onboard black box storage. Its physical integration requirements are a 38.5×38.5mm board footprint and a 30.5×30.5mm mounting pattern, with a stated weight of 8.4g. Power input is 3-6S LiPo, and the board incorporates LC filtering and dual independent BECs. A Type-C USB interface and BetaFlight OSD with an AT7456E chip complete its principal onboard interfaces.
For installation, the controller provides a direct plug-in connection to the DJI Air Unit and seven UART groups, with UART3 fixed for Bluetooth. The current batch does not support Bluetooth wireless parameter tuning following the February 25, 2026 hardware adjustment. The supplied package is a flight-controller board and installation accessories: an O3 3-in-1 cable, FC adapter cable, sh1.0 four-pin silicone cable, camera, VTX and buzzer connection cables, plus four silicone grommets. Firmware integration uses the GEPRC_TAKER_H743 target, with multiple firmware options offered.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | GEPRC TAKER H743 BT Flight Controller |
| MCU | STM32H743 |
| IMU | MPU6000 + ICM42688-P (dual gyro) |
| Air Unit connection | Direct plug-in connection to DJI Air Unit |
| Black box storage | 512M onboard |
| Bluetooth wireless parameter tuning | Not supported in the current batchCurrent batch affected by hardware adjustments announced February 25, 2026. |
| Barometer | Supported; integrated barometer |
| USB interface | Type-C |
| OSD | BetaFlight OSD with AT7456E chip |
| BEC output | 5V@3A, [email protected] dual BEC |
| Firmware target | GEPRC_TAKER_H743 |
| Firmware options | Multiple firmware options |
| Board size and mounting | 38.5×38.5mm; mounting hole size 30.5×30.5mm |
| Input voltage | 3-6S LiPo |
| UART ports | 7 groupsUART3 fixed for Bluetooth. |
| Power filtering | Integrated LC filter |
| Weight | 8.4g |
| Supplied configuration | 1 × FC board; 1 × O3 3-in-1 connection cable; 1 × FC adapter cable; 1 × sh1.0 4pin silicone cable; 1 × camera connection cable; 1 × VTX connection cable; 1 × buzzer connection cable; 4 × silicone grommetsIncluded equipment. |
Request a quote for GEPRC TAKER H743 BT Flight Controller
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
