Product overview
The GEPRC TAKER H743 BT 32Bit 65A Stack combines a TAKER H743 BT flight controller with a TAKER H65_8S_32Bit 65A four-in-one ESC for UAV flight control and motor integration. Its STM32H743VIH6 processor uses a Cortex-M7 core running at up to 480MHz, paired with MPU6000 and ICM42688-P gyroscopes. Eight motor output ports support X8 integration, while firmware compatibility includes Betaflight, INAV and Ardupilot. The supplied configuration is an electronics stack with wiring and mounting accessories.
Installation requires space for a 38.5×38.5mm flight controller and a 42×45.7mm ESC, both using 30.5×30.5mm mounting patterns. Their respective weights are 8.4g and 15.8g. The ESC mounting holes reduce from φ4mm to φ3mm with silicone shock-absorbing rings. Integration provisions include a direct DJI Air Unit connection, Type-C USB, seven UART groups, an integrated barometer and LC power filtering. UART3 is fixed for Bluetooth, but the current hardware batch does not support Bluetooth wireless parameter tuning.
Power selection must follow the complete stack’s 3-6S LiPo limit, although the ESC alone accepts 3-8S LiPo. The ESC specifies 65A continuous current and a 70A burst lasting five seconds, with Dshot 150/300/600 control protocols and current measurement support. Supplied accessories include a 50V 1000uF electrolytic capacitor, DJI, flight-controller, receiver, camera and VTX connection cables, plus a 12AWG 110mm XT60 power cable. M3 screws, nylon nuts and silicone anti-shake pads complete the mounting package.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | GEPRC TAKER H743 BT 32Bit 65A Stack |
| Flight controller model | TAKER H743 BT Flight Controller |
| Flight controller MCU | STM32H743 |
| Processor architecture and clock | STM32H743VIH6, Cortex-M7 core, up to 480MHz |
| Flight controller IMU | MPU6000 + ICM42688-P (dual gyro) |
| Black box storage | 512M onboard |
| OSD | BetaFlight OSD with AT7456E chip |
| Flight controller firmware target | GEPRC_TAKER_H743 |
| Flight controller dimensions and mounting | 38.5×38.5mm; mounting hole spacing 30.5×30.5mm |
| Flight controller input voltage | 3-6S LiPoFlight controller. |
| UART ports | 7 groupsUART3 fixed for Bluetooth. |
| Flight controller weight | 8.4gFlight controller. |
| ESC model | TAKER H65_8S_32Bit 65A 4IN1 ESC |
| ESC input voltage | 3-8S LiPoComplete stack only supports 3-6S. |
| ESC continuous current | 65A |
| ESC burst current | 70A5 seconds. |
| ESC control protocols | Dshot 150/300/600 |
| ESC dimensions and mounting | 42×45.7mm; mounting hole spacing 30.5×30.5mm; φ4mm holes, φ3mm with silicone shock-absorbing ringsUsing the silicone shock-absorbing ring reduces the hole diameter from φ4mm to φ3mm. |
| ESC weight | 15.8gESC. |
| ESC firmware target | GEPRC_F4_4in1 |
| Bluetooth tuning limitation | Bluetooth wireless parameter tuning is not supported in the current batchCurrent batch affected by temporary hardware adjustments, as announced February 25, 2026. |
| Motor outputs and X8 integration | Eight motor output ports; compatible with X8 models |
| Firmware compatibility | Betaflight, INAV and Ardupilot |
| Air unit connection | Direct plug for DJI Air Unit |
| USB interface | Type-C |
| Barometer | Integrated barometer |
| Power filtering | Integrated LC filter |
| Current measurement | Ammeter supportedESC. |
| Included electronics and wiring | 1 flight controller; 1 four-in-one ESC; 1 electrolytic capacitor (50V 1000uF); 1 DJI cable (SH1.0 6pin 100mm); 1 FC adapter cable (SH1.0 8pin 30mm); 1 receiver silicone cable (SH1.0 4pin 150mm); 1 camera cable (SH1.0-SH1.25 3pin 60mm); 1 VTX cable (SH1.0 4pin-6pin 100mm); 1 XT60 power cable (12AWG 110mm)Supplied configuration. |
| Included mounting hardware | 4 M3×30 screws; 4 M3×25 screws; 8 M3 nylon nuts; 12 M3 silicone anti-shake padsSupplied configuration. |
Request a quote for GEPRC TAKER H743 BT 32Bit 65A Stack
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
