Product overview
The GEPRC TAKER F411 8Bit 12A AIO combines flight control and ESC electronics on a 31.2×31.2mm board weighing 7g, intended for small FPV drone builds. Its STM32F411 controller works with an ICM42688P gyroscope specified at an 8K sampling rate. Installation uses 25.5mm*25.5mm mounting holes with M2 holes. Integration provisions include R1 T1 and R2 T2 UART connections, an NR2 reverse port, micro USB, buzzer and LED support, and BetaFlight OSD through an AT7456E chip. Onboard flash provides black-box recording for parameter adjustment.
Configuration choices comprise a built-in SPI ELRS 2.4G receiver version and a version without that receiver. The ESC accepts 2-4S batteries and is rated for 12A continuous current and 13A peak current, defining the power envelope for a build. It supports Dshot300, Oneshot and Multishot. The supplied electronics package includes an XT30-5.5CM-20AWG power cable, eight M2*6.5mm damping balls, a 35V220UF capacitor, five M1.4X5 self-tapping screws, an instruction manual and an aluminum foil bag. This is an integration component for a drone build, rather than a complete flight platform or airframe kit.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | TAKER F411 8Bit 12A AIO (built-in/without ELRS receiver) |
| Options | Built-in ELRS, Without ELRS |
| Receiver | Built-in SPI ELRS 2.4G receiverBuilt-in receiver version. |
| MCU | STM32F411 |
| IMU | ICM42688P |
| Firmware target | GEPRC_F411_SX1280 |
| OSD | BetaFlight OSD w/ AT7456E chip |
| UART ports | R1 T1\R2 T2 |
| Reverse port | NR2 |
| Buzzer support | YES |
| LED support | YES |
| USB port | Micro USB |
| ESC MCU | BB21F16G |
| Black box | 16Mb onboard flash memory |
| Continuous current | 12A |
| Peak current | 13A |
| Battery input | 2-4S |
| ESC protocols | Dshot300,Oneshot,Multishot |
| Current meter | 210 |
| ESC firmware | G-H-30 – Bluejay, 0.16, 48kH |
| Board size | 31.2×31.2mm Board |
| Mounting holes | 25.5mm*25.5mm hole, M2 hole |
| Weight | 7g |
| Gyroscope sampling rate | ICM42688P gyroscope, 8K sampling rate |
| Included equipment | 1 x TAKER F411 12A (built-in/without ELRS receiver); 1 x XT30-5.5CM-20AWG power cable; 8 x M2*6.5mm FC damping balls (4 each in red/black); 1 x 35V220UF capacitor; 5 x Self-tapping screws (M1.4X5); 1 x instruction manual; 1 x aluminum foil bagSupplied configuration with or without ELRS receiver. |
Request a quote for GEPRC TAKER F411 8Bit 12A AIO
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
