ChinaDrone.Request a quote ↗
COMPONENT

GEPRC TAKER F722 SE Flight Controller

By GEPRC ↗

The GEPRC TAKER F722 SE Flight Controller combines an STM32F722RET6 MCU, MPU6000 IMU, black box flash and BetaFlight OSD hardware. This 6.0g control board accepts LiPo 2-6S power and uses a 25.5×25.5mm mounting pattern. Interfaces include Type-C USB and six UARTs, with UART6 reserved for ESC use only.

Request a quote ↗
GEPRC TAKER F722 SE flight controller board with four mounting holes
GEPRC TAKER F722 SE flight controller board with four mounting holes
ModelTAKER F722 SE FC
MCUSTM32F722RET6
IMUMPU6000
Black box storage32Mb Flash
USB connectorType-C
OSDBetaFlight OSD with AT7456E chip

Product overview

The GEPRC TAKER F722 SE Flight Controller is a UAV flight control electronics board built around an STM32F722RET6 MCU and an MPU6000 IMU. Its onboard configuration includes 32Mb of flash for black box recording, BetaFlight OSD hardware using an AT7456E chip, and a Type-C USB connector. The firmware target is TAKERF722SE. Together, these components provide processing, sensing, recording and display provisions for integration into a UAV. The controller has six UART interfaces, with UART6 reserved for ESC use only.

Physical integration requires space for the 31.7×31.5mm board and its 25.5×25.5mm mounting pattern. The mounting holes are φ4mm; vibration reduction silicone adapts them for use with 3mm or 2mm fixing screws. The board weighs 6.0g. Electrical integration requires an input within 7.4V-25.2V, corresponding to LiPo 2-6S. Its power circuitry includes an integrated LC filter and a dual-output BEC with a 10V@2A output. The board dimensions, mounting arrangement, battery range and ESC-only UART6 assignment define key requirements for installation.

Specifications

SpecificationValue & conditions
ModelTAKER F722 SE FC
MCUSTM32F722RET6
IMUMPU6000
Black box storage32Mb Flash
USB connectorType-C
OSDBetaFlight OSD with AT7456E chip
BEC outputDual-output BEC; 10V@2A output.
Firmware targetTAKERF722SE
Dimensions31.7×31.5mm
Mounting pattern and hole size25.5×25.5mm mounting pattern; φ4mm mounting holes.Use vibration reduction silicone to adapt the fixing screws to 3mm or 2mm.
Input voltage7.4V-25.2VLiPo 2-6S.
UART interfaces6 UARTsUART6 is for ESC only.
Power filterIntegrated LC filter
Weight6.0g
SOURCE WITH CHINADRONE

Request a quote for GEPRC TAKER F722 SE Flight Controller

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
GEPRC TAKER F405 BLS 60A STACK flight controller and ESC stack
Flight control & navigation

GEPRC TAKER F405 BLS 60A STACK

By GEPRC

The GEPRC TAKER F405 BLS 60A STACK is a UAV electronics stack pairing an F405 flight controller with a 60A four-in-one ESC. Designed for direct DJI Air Unit connection, it provides 3–6S LiPo operation, onboard logging, Type-C USB and mounting hardware, with separate board footprints sharing a 30.5×30.5mm mounting pattern.

DJI WooKong-H flight control system with rectangular modules and a round white module
Flight control & navigation

WooKong-H

By DJI

DJI WooKong-H is a flight control system. Its documentation set includes a version 1.8 user manual and release notes, both dated June 21, 2012. Both documents are provided in PDF format as references for the system.

Flight control & navigation

Allspark 2-Orin NX

By AMOVLAB

The AMOVLAB Allspark 2-Orin NX is an onboard computer. Its role is airborne computing, with Allspark 2-Orin NX identifying the model and AMOVLAB identifying the manufacturer. The product is classified as an aircraft computing component.