Product overview
The GEPRC TAKER F722 BT 8Bit 65A STACK combines a GEP-F722-BT-HD V3 flight controller with a TAKER H65_8S_BLS 65A four-in-one ESC for UAV flight control and motor control. The controller uses an STM32F722 MCU and an ICM42688-P IMU connected over SPI, with 512M onboard black box storage, a barometer and an integrated LC filter. Integration provisions include Type-C USB, a direct DJI Air Unit connection and BetaFlight OSD using an AT7456E chip. Five UART groups are specified, with UART4 fixed for Bluetooth.
The controller measures 36.9×36.9mm and weighs 8.2g; the ESC measures 42×45.7mm and weighs 14.9g. Both use a 30.5×30.5mm mounting pattern with φ4mm holes that become φ3mm when fitted with silicone shock-absorbing rings. Electrical integration must account for the separate input ranges: 3–6S LiPo for the controller and 3–8S Lipo for the ESC. The ESC specifies 65A continuous current and a 70A burst for five seconds, supports Dshot 150/300/600 and provides current sensing.
The supplied configuration is an electronics stack kit comprising the flight controller board, ESC board and capacitor, together with connection cables and mounting hardware. Cables cover the O3 connection, flight controller adapter, four-pin silicone connection, camera, VTX and XT60 power connection. Mounting hardware comprises four M3*30 screws, four M3*25 screws, eight nylon nuts and twelve silicone anti-shake pads. Despite the BT model designation, the current batch does not support Bluetooth wireless parameter tuning because of temporary hardware adjustments announced on February 25, 2026.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | GEPRC TAKER F722 BT 8Bit 65A STACK |
| Stack architecture | GEP-F722-BT-HD V3 flight controller paired with TAKER H65_8S_BLS 65A 4IN1 ESC |
| Flight controller MCU | STM32F722 |
| Flight controller IMU | ICM42688-P(SPI) |
| Black box storage | 512M onboard |
| OSD | BetaFlight OSD with AT7456E chip |
| Flight controller BEC | 5V@3A, [email protected] dual BEC |
| Flight controller firmware target | GEPRCF722_BT_HD_V3 |
| Flight controller dimensions and mounting | 36.9×36.9mm; mounting pattern 30.5×30.5mm; φ4mm holes, reduced to φ3mm with silicone shock-absorbing ringsWith a silicone shock-absorbing ring, the mounting hole diameter becomes φ3mm. |
| Flight controller input voltage | 3-6S LiPoFlight controller. |
| Flight controller UART | 5 groups (UART4 fixed for Bluetooth)UART4 is fixed for Bluetooth. |
| Flight controller weight | 8.2gFlight controller. |
| ESC input voltage | 3-8S LipoTAKER H65_8S_BLS 65A 4IN1 ESC. |
| ESC continuous current | 65A |
| ESC burst current | 70A (5 second)5 second burst. |
| ESC control protocols | Dshot 150/300/600 |
| ESC dimensions and mounting | 42×45.7mm; mounting pattern 30.5×30.5mm; φ4mm holes, reduced to φ3mm with silicone shock-absorbing ringsWith silicone shock-absorbing rings, the mounting hole diameter becomes φ3mm. |
| ESC weight | 14.9gESC. |
| ESC firmware target | B_X_30ESC. |
| Air Unit connection | Direct plug-in connection to the DJI Air Unit |
| Bluetooth tuning limitation | Bluetooth wireless parameter tuning is unavailable on the current batchCurrent batch affected by temporary hardware adjustments, as announced February 25, 2026. |
| Barometer | Supported; integrated barometer |
| USB interface | Type-C |
| Power filter | Integrated LC filter |
| Current sensing | Ammeter supportedESC. |
| Included boards and capacitor | 1 × FC board; 1 × ESC board; 1 × capacitorSupplied equipment. |
| Included cables | 1 × O3 3-in-1 connection cable; 1 × FC adapter cable; 1 × sh1.0 4pin silicone cable; 1 × camera connection cable; 1 × VTX connection cable; 1 × XT60 power cableSupplied equipment. |
| Included mounting hardware | 4 × M3*30 screws; 4 × M3*25 screws; 8 × nylon nuts; 12 × silicone anti-shake padsSupplied equipment. |
Request a quote for TAKER F722 BT 8Bit 65A STACK
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
