Product overview
The GEPRC GEP-MK5D O3 DeadCat Frame provides an airframe kit for a 5-inch FPV build centered on O3 onboard recording. Its DeadCat arrangement keeps propellers outside the recording view. The structure combines 5mm arms, 2.5mm main plates and a 7075-T6 aluminum alloy camera side plate. A 230mm wheelbase sits within overall dimensions of 208mm x 193mm x 42mm. Integration provisions include a 20mm camera installation space, 30.5mm x 30.5mm flight controller mounting holes, and motor mounting patterns of 16x16mm and 19x19mm.
O3 integration uses soft TPU mounting parts and an air inlet cooling port, while separate compartments accommodate a capacitor and buzzer. Standard and Pro kits share the listed structural components, camera vibration reduction mount, O3 VTX mount and antenna mounts. Pro adds protective parts, motor shock pads, a buzzer holder and action camera mounting hardware. Standard weighs 168.0g and Pro weighs 197.0g. These are frame kits supplied with mounting hardware and accessories; the listed contents do not include propulsion, flight electronics, a battery or an O3 air unit.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity and supplied format | GEPRC GEP-MK5D O3 DeadCat Frame; airframe kit. |
| Recording-oriented layout | DeadCat layout intended to keep propellers out of the recorded view.With O3 onboard recording. |
| Edition and component selections | Standard; Pro; MK5X Conversion to MK5D Conversion Kits; Upgrade Kits; MK5D Top Plate; MK5D Front Bottom Plate; MK5D Rear Bottom Plate; MK5D Fore Arm; MK5D Rear Arm; MK5D Fixed Plate; O3 VTX printing parts; XT60EW-M Connector; MK5-M10 GPS 3D Printed; MK5-M1025 GPS 3D Printed. |
| Colors | Coral Orange, Emerald Green. |
| Wheelbase | 230mmGEP-MK5D O3 Frame. |
| Top plate thickness | 2.5mm |
| Bottom plate thickness | 2.5mm |
| Arm plate thickness | 5mm |
| Flight controller mounting holes | 30.5mm x 30.5mm |
| Camera installation space | 20mm |
| Suitable propeller size | 5″ propeller |
| Dimensions | 208mm x 193mm x 42mmGEP-MK5D O3 Frame. |
| Weight | 168.0gStandard version. |
| Weight | 197.0gPro version. |
| Supplied frame components | 1 x 2.0mm small top plate; 1 x 2.5mm large top plate; 1 x 2.5mm front bottom plate; 1 x 2.5mm rear bottom plate; 2 x 5.0mm front arms; 2 x 5.0mm rear arms; 1 x 5.0mm arm limit plate; 1 x 2.0mm front protection plate; 1 x camera aluminum part; 1 x set of screws.Standard edition. |
| Supplied 3D printed parts | 1 x camera vibration reduction mount; 1 x O3 VTX mount; 1 x VTX antenna mount; 1 x TBS antenna mount.Standard edition. |
| Supplied accessories | 8 x M3x8 flight controller shock absorbing balls; 4 x 10x50mm motor hubs.Standard edition. |
| Other supplied accessories | 1 x M15x250 battery strap; 2 x M20x250 battery straps; 2 x battery non-slip mats; 8 x EVA tripod shock pads; 1 x EVA camera base; 1 x EVA camera base with backrest; 1 x 3M double-sided tape; 1 x 1.5mm L-type screwdriver; 1 x 2.0mm L-type screwdriver; 1 x antenna fixing tube.Standard edition. |
| Supplied frame components | 1 x 2.0mm small top plate; 1 x 2.5mm large top plate; 1 x 2.5mm front bottom plate; 1 x 2.5mm rear bottom plate; 2 x 5.0mm front arms; 2 x 5.0mm rear arms; 1 x 5.0mm arm limit plate; 1 x 2.0mm front protection plate; 1 x camera aluminum part; 1 x set of screws.Pro edition. |
| Supplied 3D printed parts | 1 x front protector; 4 x motor shock pads; 1 x buzzer holder; 1 x VTX antenna mount; 1 x TBS antenna mount; 1 x GP camera mount; 1 x Naked GP 8 camera base; 1 x camera vibration reduction mount; 1 x O3 VTX mount.Pro edition. |
| Supplied accessories | 8 x M3x8 flight controller shock absorbing balls; 4 x 10x50mm motor hubs.Pro edition. |
| Other supplied accessories | 1 x M15x250 battery strap; 2 x M20x250 battery straps; 2 x battery non-slip mats; 1 x EVA camera base; 1 x EVA camera base with backrest; 1 x 3M double-sided tape; 1 x 1.5mm L-type screwdriver; 1 x 2.0mm L-type screwdriver; 1 x 3.0mm L-type screwdriver; 1 x M8 wrench; 1 x antenna fixing tube.Pro edition. |
| Camera side plate material | 7075-T6 aluminum alloy. |
| Camera integration and recording support | Accommodates the DJI O3 air unit camera with 155° FOV and up to 4K 60FPS recording.With DJI O3 air unit camera. |
| Video transmitter mounting and cooling | Soft TPU printed mounting parts and an air inlet cooling port.For the O3 VTX module. |
| Motor mounting patterns | 16x16mm and 19x19mm. |
| Dedicated component compartments | Independent capacitor and buzzer compartments. |
| Action camera mounting support | Two camera mounts supporting GP action cameras, Naked GP 8/10, Insta 360 GO2 and Caddx Peanut.Pro version with its two supplied camera mounts. |
Request a quote for GEP-MK5D O3 DeadCat Frame
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
