ChinaDrone.Request a quote ↗
COMPONENT

GEPRC GEP-M8U GPS Module

By GEPRC ↗

The GEPRC GEP-M8U GPS Module is a compact satellite-positioning component for FPV and fixed-wing integration. Its 22mm x 22mm x 8mm, 7.9g package offers GPS+BDS or GPS+GLONASS configurations, UART communication and a solder-free terminal connection. It includes a cable and manual but has no compass.

Request a quote ↗
GEPRC GEP-M8U GPS module with a square black antenna face and copper-colored housing
GEPRC GEP-M8U GPS module with a square black antenna face and copper-colored housing
ModelGEP-M8U GPS module
Intended applicationsFPV, fixed-wing and other products
GNSS configurationsGPS+BDS, GPS+GLONASS
Receiving formatGPS, GLONASS, BDSChoose GLONASS or BDS.
Input voltage3.3V-5V
Channels72ch

Product overview

The GEPRC GEP-M8U GPS Module provides satellite positioning for FPV, fixed-wing and other products. Its physical package measures 22mm x 22mm x 8mm and weighs 7.9g, defining the space and mass required for installation. Configuration choices pair GPS with either BDS or GLONASS; the receiving-format selection specifies choosing between those two additional constellations. The module has 72 channels and no compass, an important limitation when specifying the navigation equipment needed for an aircraft integration.

Electrical integration uses a 3.3V-5V input and an SH1.0-4P output connector, with a terminal connection that requires no soldering. Communication uses UART at 115200bps, with UBLOX output at 10Hz. Onboard PPS positioning and power indication support use of the module. The supplied package contains one GEP-M8U GPS module, one SH1.0-4Pin terminal cable and one GPS user manual. This is a positioning component supplied with its connection cable and documentation, rather than a flight platform or airframe kit.

Specifications

SpecificationValue & conditions
ModelGEP-M8U GPS module
Intended applicationsFPV, fixed-wing and other products
GNSS configurationsGPS+BDS, GPS+GLONASS
Receiving formatGPS, GLONASS, BDSChoose GLONASS or BDS.
Input voltage3.3V-5V
Channels72ch
CompassNone
Baud rate115200bps
Output connectorSH1.0-4P
Communication protocolUART
Output protocolUBLOX
Output frequency10Hz
Speed accuracy0.05 m / s
Horizontal positioning accuracyHorizontal less than 2.5M, SBAS less than 2.0MSBAS accuracy applies with SBAS.
Timing accuracy30 ns
Receiving sensitivityTracking -162dBm, acquisition -160dBm
Dynamic characteristicsMaximum height: 50000m; maximum speed: 500m/s
Maximum acceleration4G
Size22mm x 22mm x 8mm
Weight7.9g
Terminal connectionSH1.0-4Pin terminal design; no soldering required
Onboard indicatorsOnboard PPS positioning and power indicator
Included equipment1 x GEP-M8U GPS module; 1 x SH1.0-4Pin terminal cable; 1 x GPS user manual
SOURCE WITH CHINADRONE

Request a quote for GEPRC GEP-M8U GPS Module

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Flight control & navigation

Radiolink RTK F9P

By RadioLink Electronic Limited

The Radiolink RTK F9P is a compact RTK positioning receiver built around a Ublox F9P module with an integrated geomagnetic sensor. It supports rover and base station roles, updates up to 20Hz, and USB, UART and shared I2C connections. The standard package supplies the receiver and packing bag; antenna kits are separate configurations.

Flight control & navigation

BW-IMU125E

By Wuxi Beiwei Sensing Technology

The Wuxi Beiwei Sensing Technology BW-IMU125E is a CAN inertial measurement unit for unmanned aircraft, robotics and stabilization applications. It combines gyroscope and three-axis acceleration sensing with 500Hz output. Packaged and bare-board dimensions support integration planning, while a 9-36V DC supply and -40 to 85°C operating range define electrical and environmental requirements.

GEPRC TAKER F722 8S flight controller board with USB-C port and white connectors
Flight control & navigation

GEPRC TAKER F722 8S Flight Controller

By GEPRC

The GEPRC TAKER F722 8S Flight Controller is a compact UAV control board with an STM32F722 processor, ICM42688-P IMU, barometer and eight motor outputs. It accepts 3–8S LiPo input and offers six UARTs, dual BEC outputs and direct DJI Air Unit connection. Connection cables and mounting hardware are included.