Product overview
The GEPRC TAKER F722 8S Flight Controller provides flight-control electronics for UAV integration, with an STM32F722 processor, an SPI-connected ICM42688-P IMU and an integrated barometer. Its 38.5×38.5mm board weighs 8.3g and uses a 30.5×30.5mm mounting pattern. The mounting holes measure φ4mm, reducing to φ3mm with the silicone shock-absorbing circles installed. Integration interfaces include six UARTs, a Type-C USB port, M1–M8 motor outputs and a direct connection for a DJI Air Unit.
Electrical integration is specified for 3–8S LiPo input, with separate 5V@3A and 12V@3A BEC outputs and an integrated LC filter. The controller provides 16M of onboard black box storage and BetaFlight OSD through an AT7456E chip; its firmware target is GEPRC_TAKER_F722_8S. The supplied configuration is a flight controller with connection cables and mounting hardware, rather than a complete flight platform or airframe kit. It includes DJI, FC adapter, receiver and camera cables, plus four nylon nuts and four silicone grommets.
Specifications
| Specification | Value & conditions |
|---|---|
| Flight controller model | TAKER F722 8S Flight Controller |
| MCU | STM32F722 |
| IMU | ICM42688-P(SPI) |
| Air Unit connection | Direct plugging into DJI Air Unit |
| Black box storage | 16M onboard |
| Barometer | Integrated barometer |
| Motor outputs | M1-M8 |
| USB interface | Type-C |
| OSD | BetaFlight OSD w/ AT7456E chip |
| BEC | 5V@3A,12V@3A dual BEC |
| Firmware target | GEPRC_TAKER_F722_8S |
| Size | 38.5×38.5mm |
| Mounting | 30.5×30.5mm, φ4mm hole becomes φ3mm after using a silicone shock-absorbing circleHole diameter becomes φ3mm when using a silicone shock-absorbing circle. |
| Input voltage | 3-8S LiPo |
| UART | 6 UARTs |
| Power filter | Integrated LC filter |
| Weight | 8.3g |
| Supplied flight controller | 1 x TAKER F722 8S Flight ControllerIncluded equipment. |
| DJI connection cable | 1 x DJI connection cable (SH1.0 6pin 100mm)Included equipment. |
| FC adapter cables | 2 x FC adapter cable (SH1.0 8pin 30mm)Included equipment. |
| Nylon nuts | 4 x Nylon nutsIncluded equipment. |
| Silicone grommets | 4 x Silicone grommetsIncluded equipment. |
| Receiver cables | 2 x Receiver silicone cable (SH1.0 4pin 150mm)Included equipment. |
| Camera connection cable | 1 x Camera connection cable (SH1.0-SH1.25 3pin 60mm)Included equipment. |
Request a quote for GEPRC TAKER F722 8S Flight Controller
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
