Product overview
The Radiolink RTK F9P is a positioning receiver for integration into drone and vehicle control systems. Its hardware combines a Ublox F9P module with an isenTEK IST8310 geomagnetic sensor. The enclosure dimensions are 49 × 49 × 31.6mm. An SMA antenna connection feeds a PCB signal path described as having almost zero loss, while a 3PEAK TPL910A regulator and separated digital-analog PCB routing address electrical noise. Antenna protection includes TVS and ESD devices; the data interface also has ESD protection.
Integration connections comprise one USB port, two UART ports and an I2C interface that shares the UART1 port. A Type-C connection supports upgrades, and separate power and RTK LEDs provide status indication. The receiver can serve as either a rover or a base station, with updates up to 20Hz, convergence in less than 10 seconds and RTK mode switching within 10 seconds. High-precision positioning operates within the communication range of the mobile station, making that communication boundary relevant to system deployment.
The standard supply contains one RTK F9P receiver and a packing bag; it is a positioning component rather than a complete aircraft or airframe kit. Separate recommended configurations add an ANT-B10 base station antenna or an ANT-M7 rover antenna, each with its connection cable. A paired configuration includes two receivers, both antennas and their cables, plus a Type-C cable. With the antenna kit and PIX flight control series, the receiver supports integration into Radiolink agricultural machinery control systems or the M435 Heavy Lift Drone.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity and type | Radiolink RTK F9P RTK receiver |
| Positioning module | Ublox F9P |
| Antenna signal path | PCB antenna feeder from the SMA antenna connection to the RTK module RF input, described as achieving almost zero loss |
| Voltage regulator | 3PEAK TPL910A low-ripple, fast-response LDO |
| Output voltage ripple | As low as 4.5uVrms |
| Circuit layout | PCB routing with digital-analog circuit isolation |
| Geomagnetic sensor | Built-in isenTEK IST8310 |
| Interfaces | One USB port, two UART ports and one I2C interface sharing the UART1 port |
| Upgrade connection | Type-C connection for upgrades |
| Indicators | Power and RTK LEDs |
| Physical dimensions | 49mm × 49mm × 31.6mm (1.93 × 1.93 × 1.24 inches) |
| Antenna protection | TVS and ESD protection at the antenna end |
| Data interface protection | ESD protection |
| Supported operating roles | Rover or base station |
| Update rate | Up to 20Hz |
| Convergence time | Less than 10 seconds |
| RTK mode switching | Within 10 seconds |
| System integration | Integration with Radiolink's agricultural machinery automatic driving control system or M435 Heavy Lift DroneRTK receiver RTK F9P with ANT-B10 base station antenna, ANT-M7 rover antenna and PIX flight control series. |
| Positioning operating boundary | High-precision positioning within mobile-station communication rangeWithin the communication range of the mobile station. |
| Standard receiver package | One RTK F9P receiver and one packing bag |
| Base station kit contents | One RTK F9P receiver, one ANT-B10 base station antenna and one ANT-B10 connection cableRecommended RTK Base Station Kit. |
| Rover kit contents | One RTK F9P receiver, one ANT-M7 rover antenna and one ANT-M7 connection cableRecommended RTK Rover Kit. |
| Paired receiver package contents | Two RTK F9P receivers, one ANT-B10 base station antenna and cable, one ANT-M7 rover antenna and cable, and one Type-C cable for upgrades and parameter settingRecommended RTK base station and rover package. |
Request a quote for Radiolink RTK F9P
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
