Product overview
FlashHobby lists the XSD7A as a nano FPV racing ESC.
The accompanying description identifies a BLheli_S brushless speed controller rated at 7A for 1–2S operation.
Specifications
| Specification | Value & conditions |
|---|---|
| Listed electrical rating | 7A, 1–2S |
| Model | XSD7A |
| ESC type | Micro brushless ESC |
| Dimensions | 11.14 × 16.26 mm |
| Net weight | 1.0 g |
| Battery input | 1–2SLiPo input |
| Continuous current | 7 A |
| Burst current | 10 A≤10 s |
| Supported signals and modes | Dshot600/300/150, PWM, Oneshot125/42, Multishot, Damped Mode |
| Firmware | BLHELI_S |
| MCU | Siliconlabs EFM8BB21F16G, QFN-20 |
| MCU operating frequency | Up to 50 MHz |
| Driver IC | Dedicated high-speed drive IC |
| Supported rotational speed | Up to 500,000 rpm |
| Firmware upgrade | Online firmware upgrade supportedVia signal cable |
| Motor PWM generation | Hardware-generated motor PWM |
| Braking | Damped light regenerative braking |
| Intended application | Multi-rotor aircraft |
| Racing application | Aggressive racing multi-rotor flight |
| Motor and load support | Higher KV motors and higher power loads supported |
| ESC parameter configuration | Set four ESC parameters at a time through the flight controller using BLHeli softwareFlight controller running CleanFlight or BetaFlight firmware |
| Throttle signal detection | Automatic |
| Throttle pulse width | 1–2 msNormal PWM throttle mode |
| Throttle calibration | Throttle range calibration not requiredDshot |
| Signal cable | Twisted-pair silicone cable |
Request a quote for FlashHobby XSD7A Nano FPV Racing ESC
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
