ChinaDrone.Request a quote ↗
COMPONENT

EFT SL80

By EFT ↗

The EFT SL80 is an 80W drone spotlight payload combining 16 LEDs and an optical lens system for a 25m illumination range. It features PWM brightness control, IP67 waterproofing, three landing-gear mounting adapters, and NTC-based temperature management that reduces brightness to 10% at 110°C.

Request a quote ↗
EFT SL80 spotlight payload with two LED light units mounted on drone landing gear
EFT SL80 spotlight payload with two LED light units mounted on drone landing gear
ProductEFT SL80 spotlight
Total power80W
Light source16 high-brightness LEDs with an optical lens system
Illumination range25m
Waterproof ratingIP67
Brightness controlIntelligent dimming system supporting PWM control

Product overview

The EFT SL80 is a spotlight payload for illuminating drone operations at night and in low-light conditions. Its lighting assembly combines 16 high-brightness LEDs with an optical lens system, providing an illumination range of 25m at a total power of 80W. An intelligent dimming system supports PWM control, allowing brightness adjustment as part of the installation. The unit carries an IP67 waterproof rating. Its supplied configuration is a lighting accessory with mounting adapters, rather than a flight platform or an airframe kit.

Mechanical integration uses fixed adapters for landing-gear mounting, with three supplied sizes covering diameters of Φ 20mm, Φ 25mm, and Φ 30mm. Installation proceeds through fitting the adapter, attaching the spotlight, and installing the LED cable. An intelligent control module and NTC sensor provide automatic temperature control. Thermal protection is a material operating limitation: brightness drops to 10% at 110°C, and operation resumes below 70°C. Mounting selection therefore centers on the stated landing-gear diameters, while brightness integration uses the supported PWM control.

Specifications

SpecificationValue & conditions
ProductEFT SL80 spotlight
Total power80W
Light source16 high-brightness LEDs with an optical lens system
Illumination range25m
Waterproof ratingIP67
Brightness controlIntelligent dimming system supporting PWM control
Supplied mounting adaptersThree fixed adapters: 20mm, 25mm, and 30mm, for landing-gear mounting
Mounting diametersΦ 20mm, Φ 25mm, and Φ 30mm
Temperature control hardwareIntelligent control module and NTC sensor for automatic temperature control
Thermal brightness reductionBrightness drops to 10%At 110°C.
Thermal recoveryOperation resumesBelow 70°C.
SOURCE WITH CHINADRONE

Request a quote for EFT SL80

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Mission payloads

Kpower HC1812-W 18kg Drone Seeding Servo

By Kpower

The Kpower HC1812-W 18kg Drone Seeding Servo is an agricultural-spreader actuator with an aluminum-alloy case, metal gears and magnetic position sensing. It provides 18kg·cm stall torque, 360° travel with customization supported, and PWM, UART-TTL and RS-485 interfaces in a 75g package rated IP67.

HOBBYWING SPRAY 9L centrifugal nozzle with attached wiring
Mission payloads

HOBBYWING SPRAY 9L

By HOBBYWING

HOBBYWING SPRAY 9L, originally named HW 9L-Spray, is a centrifugal nozzle for agricultural drones. It has a rated flow of 5 L/min and maximum flow of 9 L/min, with a recommended 12–18S LiPo battery, 4–12 m spraying width and 35–500 μm droplet granularity.