Product overview
The CroSkylink C21D-150 provides broadband access and data transmission using a flat system architecture. It supports point-to-point links, point-to-multipoint star networks and Mesh networks, with automatic power and frequency control. Bandwidth options are 1.4MHz/3MHz/5MHz/10MHz/20MHz/40MHz, alongside customizable 600M/1.4G frequency options. Other frequency bands can also be customized according to customer requirements and the installation environment; users cannot change these themselves. Equipment connections comprise one Ethernet port, two serial ports with RS232 as the default configuration, and one USB 2.0 port.
Transmission distances extend up to 150km in star networks and up to 100km in MESH networks. The typical application configuration uses point-to-point communication, dual antennas, a 1437MHz working band, 20M bandwidth, maximum transmit power and rated-voltage supply, at 25℃ and 50% humidity. The electrical requirements are 24V~27V operating voltage and 60±12W maximum power consumption. Power ratings comprise a technical specification of 40±3dBm maximum, a 40dBm maximum output feature rating and a descriptive maximum transmission rating of 46dBm.
Installation requires antenna spacing greater than 0.2m within the same module and greater than 1m between modules, applying to both powered-on and powered-off modules. Antennas must be connected correctly: improper connections can damage the device or cause serious performance differences. Continuous operation requires proper heat dissipation, and receiving-port signal strength must remain below 10dBm. The operating temperature range is -20℃ to +55℃, the storage temperature range is -40℃ to +85℃, and the humidity range is 5% to 95% RH.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | CroSkylink C21D-150 |
| Purpose and architecture | Broadband access and data transmission with multiple bandwidth allocations and a flat system architecture. |
| Network modes | Point-to-point, point-to-multipoint star network and Mesh network |
| Star transmission distance | Up to 150kmStar network. Typical application configuration: point-to-point communication, dual antennas, 1437MHz working band, 20M bandwidth, maximum transmit power, 25℃, 50% humidity and rated-voltage supply. |
| MESH transmission distance | Up to 100kmMESH network. Typical application configuration specifies point-to-point communication, dual antennas, 1437MHz working band, 20M bandwidth, maximum transmit power, 25℃, 50% humidity and rated-voltage supply. |
| Frequency options | 600M/1.4G (customizable) |
| Bandwidth options | 1.4MHz/3MHz/5MHz/10MHz/20MHz/40MHz |
| Automatic controls | Automatic power control and frequency control |
| Ethernet interface | 1 Ethernet port |
| Serial interfaces | 2 serial ports (default RS232)Default RS232 configuration. |
| USB interface | 1 USB 2.0 port |
| Frequency customization | Customization of 600M, 1.4G and other frequency bandsAccording to customer requirements and on-site environment; users cannot make changes themselves. |
| Operating voltage | 24V~27V |
| Maximum power consumption | 60±12W |
| Transmit power specification | 40±3dBm (max) |
| Maximum output power feature | 40dBm maximum |
| Maximum transmission power description | 46dBm maximum |
| Storage temperature | -40℃～+85℃ |
| Operating temperature | -20℃～+55℃ |
| Humidity | 5%～95% RH |
| Typical application environment | Working temperature 25℃; humidity 50%Point-to-point communication, dual antenna working mode, 1437MHz working band, 20M bandwidth, maximum transmit power and rated-voltage supply. |
| Antenna connection requirement | Antenna connection is mandatory; improper connections can damage the device or cause serious performance differences. |
| Cooling requirement | Proper heat dissipation requiredContinuous operation. |
| Signal strength limit | Less than 10dBmReceiving port. |
| Antenna spacing | Within the same module: greater than 0.2m; between modules: greater than 1mApplies to powered-on and powered-off modules. |
