ChinaDroneRequest a quote →
CFCTEK Basher carbon fiber drone frame with four arms and a front camera cageCFCTEK Basher carbon fiber drone frame with four arms and a front camera cage

CFCTEK Carbon Fiber Drone Basher frame

The CFCTEK Carbon Fiber Drone Basher frame is a 5.1" carbon fiber drone frame weighing 131g+-. Its construction combines 6mm arms, 2.5mm main plates and 3mm faceplates, with 20x20 and 30x30 stack mounts and 20x20 and 25.5x25.5 VTX mounts for drone builds.

CFCTEKDrone frame
Size
5.1"
Weight
131g+-

Get a free quote

Product overview

The CFCTEK Carbon Fiber Drone Basher frame combines 6mm arms, 2.5mm main plates and 3mm faceplates for drone builds. It offers 20x20 and 30x30 stack mounts, plus 20x20 and 25.5x25.5 VTX mounts. Video system options include DJI O4/O3, Walksnail, HDZero, Analog and OpenIPC; the O4 Pro faceplate design has not yet been sufficiently tested, and its stability is not guaranteed. T300 carbon may be used for the plates, while the arms require T700. All carbon parts must be cut to the specified thicknesses for correct assembly and proper strength.

Assembly requires six 20mm standoffs, two 23mm standoffs and sixteen M3 press nuts 4.7. Screw requirements comprise four M3 8mm round head screws, five M3 8mm countersunk head screws, two M3 12mm countersunk head screws, five M3 20mm countersunk head screws and two M3 8mm high head screws. Two faceplate designs provide standard and O4 Pro options. For builds without an O4 Pro or plans to install one, the standard faceplate is recommended for greater strength and reliability. With digital video transmitters, 3D printed protection for the face, arms and unit is strongly recommended.

Propellers & airframes

Specifications

CFCTEK Carbon Fiber Drone Basher frame specifications
SpecificationValue & conditions
Product typeCFCTEK Carbon Fiber Drone Basher frame; carbon fiber drone frame.
Size5.1"
Weight131g+-
Stack mounts20x20 and 30x30
VTX mounts20x20 and 25.5x25.5
Video systemsDJI O4/O3, Walksnail, HDZero, Analog, OpenIPCThe O4 Pro faceplate design has not yet been sufficiently tested, and its stability is not guaranteed.
Arm thickness6mm
Main plate thickness2.5mm
Faceplate thickness3mm
20mm standoffs20mm [x6]Required for assembly.
23mm standoffs23mm [x2]Required for assembly.
Press nutsM3 press nut 4.7 [x16]Required for assembly.
Round head screwsM3 round head screws 8mm [x4]Required for assembly.
8mm countersunk head screwsM3 countersunk head screws 8mm [x5]Required for assembly.
12mm countersunk head screwsM3 countersunk head screws 12mm [x2]Required for assembly.
20mm countersunk head screwsM3 countersunk head screws 20mm [x5]Required for assembly.
High head screwsM3 high head screws 8mm [x2]Required for assembly.
Carbon grade recommendationsT300 carbon may be used for plates; use only T700 carbon for arms.Carbon selection for plates and arms.
Part thickness requirementAll carbon parts must be cut to the specified thicknesses for assembly and proper strength.Carbon parts cut for frame assembly.
Faceplate design optionsFace-3mm-T300.step and faceO4-3mm-T300.step
Standard faceplate recommendationChoose the standard faceplate for greater strength and reliability.Without an O4 Pro or plans to install one.
O4 Pro faceplate limitationThe O4 Pro faceplate design has not yet been sufficiently tested, and its stability is not guaranteed.O4 Pro faceplate design.
Protective accessories recommendation3D printed protection for the face, arms and unit is strongly recommended.With digital video transmitters.
Durability and reliabilityFrame durability and reliability depend on carbon and material selection and assembly.Carbon and material selection and manual assembly.

Related guides