Product overview
The BrotherHobby VS 2207 Motor (CW) is a propulsion component for FPV drones, offered in 1720KV, 2400KV and 2700KV versions. Its physical architecture combines an Al 7075 base casing and bell cap with a 12N14P motor configuration. The stator uses 0.2mm Kawasaki silicon steel, and the rotor incorporates N52H arc magnets. A SUS 420 hollow shaft runs with Japanese NMB bearings measuring 8x3x4mm. These components form the specified motor assembly, with CW retained as its model designation.
The motor’s integration interfaces comprise an M5 propeller adapter shaft thread and an M3 mounting bolt pattern measuring 16X16mm. Its battery specification is 4-6S LiPo, and its wiring is 20AWG with a length of 16cm. The motor weighs 32.5g with 16cm SR wires included in that measurement. The three KV versions share this listed set of mechanical, wiring and battery specifications. The product is an individual motor component for installation within a drone propulsion system.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | BrotherHobby VS 2207 1720KV/2400KV/2700KV Motor (CW) |
| KV options | 1720KV/2400KV/2700KV |
| Base casing | Al 7075 |
| Stator | 0.2mm Kawasaki silicon steel |
| Motor configuration | 12N14P |
| Propeller adapter shaft thread | M5 |
| Shaft | SUS 420 hollow shaft |
| Battery cell count | 4-6SLiPo battery. |
| Mounting bolt pattern | M3(16X16mm) |
| Bearings | Japanese NMB 8x3x4mm |
| Rotor | N52H arc magnets |
| Weight | 32.5gWith 16cm SR wires. |
| Wiring | 20AWG, 16cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby VS 2207 1720KV/2400KV/2700KV Motor (CW)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
