Product overview
The BrotherHobby Venom 2806.5 Motor (CW) is a propulsion component for FPV drone integration, offered in 1300KV and 1700KV versions. Its physical construction combines an Al 7075 base casing and bell cap with a hollow titanium alloy shaft. Internally, the motor uses a 12N14P configuration, a stator made from 0.2mm Kawasaki silicon steel, and N52H arc magnets in the rotor. The specified bearings are Japanese NMB units measuring 12 × 6 × 4 mm.
Mechanical integration uses an M3 bolt pattern with 19 × 19mm spacing and an M5 propeller adapter shaft thread. Electrical integration is specified for 4–6S LiPo batteries, with 18AWG wires measuring 20cm long. The listed mass is 52g with the 20cm SR wires included, so those leads form part of the stated weight configuration. The product is an individual motor component; its battery range, mounting pattern and shaft thread define the stated integration requirements.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | BrotherHobby Venom 2806.5 Motor (CW) |
| KV options | 1300KV / 1700KV |
| Base casing | Al 7075 |
| Stator | 0.2mm Kawasaki silicon steel |
| Motor configuration | 12N14P |
| Propeller adapter shaft thread | M5 |
| Shaft | Titanium alloy hollow shaft |
| Cell count | 4–6SLiPo battery. |
| Bolt pattern | M3 (19 × 19mm) |
| Bearings | Japanese NMB, 12 × 6 × 4 mm |
| Rotor | N52H arc magnets |
| Weight | 52gWith 20cm SR wires. |
| Wire gauge and length | 18AWG, 20cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby Venom 2806.5 Motor (CW)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
