Product overview
The BrotherHobby TC 2004 Ultralight Motor is a propulsion component in the manufacturer's FPV drone motor range. Its electrical options comprise 1700, 1950, 2100 and 3150 KV, with a specified LiPo cell count of 4-6S. The motor uses a 12N14P configuration, pairing N52H arc magnets in the rotor with a stator made from 0.15mm Nippon silicon steel. These specifications define the motor's electrical selection and internal construction for integration into a drone propulsion assembly.
The physical construction combines a SUS 420 shaft, NMB 7x3x3 bearings and 7075 Al for both the bell cap and base casing. For installation, the motor has an M2 12X12 bolt pattern and an M 1.5 propeller adapter shaft thread. Its wiring is specified as 24 AWG with a 16cm length. The mounting pattern, propeller attachment thread and wire length provide concrete interface details for planning the motor's placement and connections within the aircraft.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | BrotherHobby TC 2004 Ultralight Motor |
| KV options | 1700, 1950, 2100, 3150 |
| Motor configuration | 12N14P |
| Cell count | 4-6SLiPo battery. |
| Rotor | N52H arc magnets |
| Stator | 0.15mm Nippon silicon steel |
| Shaft | SUS 420 |
| Bearings | NMB 7x3x3 |
| Wiring | 24 AWG wire, 16cm length |
| Bell cap | 7075 Al |
| Base casing | 7075 Al |
| Propeller adapter shaft thread | M 1.5 |
| Bolt pattern | M2 12X12 |
Request a quote for BrotherHobby TC 2004 Ultralight Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
