Product overview
The BrotherHobby Special Edition V4 32512 Motor(CW) is a propulsion component for FPV drone integration, offered in 580KV, 950KV and 1050KV versions. Its physical construction combines an Al 7075 base casing and bell cap with a hollow titanium alloy shaft. Internally, the motor uses a 12N14P configuration, a stator made from 0.2mm Kawasaki silicon steel, N52H arc rotor magnets and Japanese NMB 12X6X4 bearings. The CW designation forms part of this specific motor’s identity.
Installation interfaces comprise an M3 bolt pattern measuring 19X19mm and an M5 propeller adapter shaft thread. These dimensions define the mounting and propeller attachment interfaces to accommodate during integration. The electrical configuration specifies a 6S LiPo battery and 16# AWG wires measuring 25cm long. Motor weight is 92.60g with the 25cm SR wires included, so that wiring condition belongs with the mass figure when allocating propulsion weight. Procurement selection also needs to retain the chosen KV version.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | BrotherHobby Special Edition V4 32512 580KV/950KV/1050KV Motor(CW) |
| KV options | 580KV/950KV/1050KV |
| Base casing | Al 7075 |
| Stator | 0.2mm Kawasaki silicon steel |
| Motor configuration | 12N14P |
| Propeller adapter shaft thread | M5 |
| Shaft | Titanium alloy hollow shaft |
| Battery cell count | 6S6S LiPo battery configuration. |
| Mounting bolt pattern | M3 (19X19mm) |
| Bearings | Japanese NMB 12X6X4 |
| Rotor | N52H arc magnets |
| Weight | 92.60gWith 25cm SR wires. |
| Wire gauge and length | 16# AWG, 25cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby Special Edition V4 32512 580KV/950KV/1050KV Motor(CW)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
