Product overview
The Nipple 4235 is an individual propulsion motor, with CW identification and three KV choices: 230KV, 330KV and 360KV. Its physical architecture combines a 12N14P configuration with a 0.2mm Kawasaki silicon-steel stator and N52H arc rotor magnets. A SUS420 shaft completes the specified rotating assembly, while both the base casing and bell cap use Al 7075. The stated motor weight is 445g, providing a concrete mass figure for propulsion-system planning.
Mechanical integration centers on an M4 bolt pattern with 30X30mm spacing. The electrical leads are specified as 14# AWG with a 100mm length, and the supported battery specification is 8-12S LiPo. Bearings are listed as Φ16*Φ8*5, without an accompanying unit. These details define the stated mounting and electrical interfaces. The product configuration is a motor component rather than a complete flight platform or airframe kit.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | BrotherHobby Nipple 4235 230KV/330KV/360KV Motor(CW) |
| KV options | 230KV / 330KV / 360KV |
| Stator | 0.2mm Kawasaki silicon steel |
| Shaft | SUS420 |
| Bolt pattern | M4 (30X30mm) |
| Rotor | N52H arc magnets |
| Wire | 14# AWG, 100mm length |
| Base casing | Al 7075 |
| Motor configuration | 12N14P |
| Cell count | 8-12SLiPo battery. |
| Bearings | Φ16*Φ8*5 |
| Weight | 445g |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby Nipple 4235 230KV/330KV/360KV Motor(CW)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
