ChinaDrone.Request a quote ↗
COMPONENT

BrotherHobby Avenger 3515 V5 370KV/520KV/550KV/680KV Motor(CW)

By BrotherHobby ↗

The BrotherHobby Avenger 3515 V5 Motor(CW) is a UAV propulsion component with a 15mm stator, 12N14P configuration and N52H arc magnets. It specifies 6–8S LiPo power, M3 mounting on a 25X25mm pattern and an M5 propeller adapter thread. Weight is 159g with 35cm SR wires.

Request a quote ↗
BrotherHobby Avenger 3515 V5 motors with folding two-blade and three-blade propellers
BrotherHobby Avenger 3515 V5 motors with folding two-blade and three-blade propellers
Manufacturer and modelBrotherHobby Avenger 3515 V5 370KV/520KV/550KV/680KV Motor(CW)
KV selection values370 520 550 680 580
Specified KV ratings370KV/520KV/550KV/680KV
Propeller type optionsThree-blade folding propeller; Two-blade folding propeller
Base casingAl 7075
Stator15mm

Product overview

The BrotherHobby Avenger 3515 V5 Motor(CW) is a UAV propulsion motor component. Its physical architecture combines a 15mm stator and 12N14P configuration with N52H arc magnets in the rotor. Al 7075 is specified for both the base casing and bell cap, while the shaft uses SUS420. These material and construction details define the motor assembly alongside its listed 12X6X4 bearings. The specified weight is 159g with 35cm SR wires, making the wiring qualification part of the integration mass.

Installation interfaces comprise an M3 bolt pattern measuring 25X25mm and an M5 propeller adapter shaft thread. Electrical integration uses 16# AWG wires with a stated length of 35cm, and the battery specification is 6–8S LiPo. The named model and specification list cover 370KV, 520KV, 550KV and 680KV; the KV selector additionally lists 580. Configuration choices also identify three-blade and two-blade folding propeller types, without establishing that either propeller is included with the motor.

Specifications

SpecificationValue & conditions
Manufacturer and modelBrotherHobby Avenger 3515 V5 370KV/520KV/550KV/680KV Motor(CW)
KV selection values370 520 550 680 580
Specified KV ratings370KV/520KV/550KV/680KV
Propeller type optionsThree-blade folding propeller; Two-blade folding propeller
Base casingAl 7075
Stator15mm
Motor configuration12N14P
Propeller adapter shaft threadM5
Shaft materialSUS420
Battery cell count6-8SLiPo battery.
Bolt patternM3 (25X25mm)
Bearings12X6X4
Rotor magnetsN52H arc magnets
Weight159gWith 35cm SR wires.
Wire gauge and length16# AWG; 35cm length
Bell capAl 7075
SOURCE WITH CHINADRONE

Request a quote for BrotherHobby Avenger 3515 V5 370KV/520KV/550KV/680KV Motor(CW)

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Flash Hobby Arthur40A 32bit electronic speed controller with power wires and signal connector.
Motors & ESCs

FlashHobby Arthur40A 32bit ESC

By FlashHobby

The FlashHobby Arthur40A 32bit ESC is a slim brushless motor controller for RC racing multirotors, fixed-wing aircraft and helicopters. Its 11 × 34.5 mm body weighs 6.4 g and combines BLHELI_32bit firmware with configurable control functions. It operates on 3–6S power, rated at 40 A continuously and 45 A for bursts of ten seconds or less.

HOBBYWING RTF 5320 200KV brushless motor with threaded shaft and attached wires.
Motors & ESCs

HOBBYWING RTF 5320

By HOBBYWING

The HOBBYWING RTF 5320 is an FPV drone brushless motor available in 200KV and 350KV versions for 12S and 8S LiPo configurations. It accommodates 16–18 inch three-blade propellers and combines a self-cooling propeller mount with mechanical retention features. Both variants weigh 488g with wire; maximum thrust is 11.9kg and 11.2kg, respectively.