Product overview
The BrotherHobby Avenger 2810 Motor is a propulsion component available in 900KV, 1180KV, 1350KV and 1500KV options. Its construction combines an Al 7075 base casing and bell cap with a hollow titanium alloy shaft. The internal architecture uses a 12N14P configuration, a stator made from 0.2mm Kawasaki silicon steel and N52H arc magnets in the rotor. Japanese NMB 12X6X4 bearings form part of the motor assembly, alongside the specified casing, shaft, stator and rotor components.
The Avenger 2810 has an M3 mounting bolt pattern measuring 19X19mm and an M5 propeller adapter shaft thread. These are its specified interfaces for mounting the motor and attaching a propeller. The battery specification is 4-6S LiPo, covering the listed motor's electrical supply range. Its wiring is specified as 18AWG with a 25cm length. The stated motor weight is 65g with 25cm SR wires included; that weight therefore describes the motor together with those wires.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | BrotherHobby Avenger 2810 Motor |
| KV options | 900KV/1180KV/1350KV/1500KV |
| Base casing | Al 7075 |
| Stator | 0.2mm Kawasaki silicon steel |
| Motor configuration | 12N14P |
| Propeller adapter shaft thread | M5 |
| Shaft | Titanium alloy hollow shaft |
| Battery cell count | 4-6SLiPo battery. |
| Bolt pattern | M3 (19X19mm) |
| Bearings | Japanese NMB 12X6X4 |
| Rotor magnets | N52H arc magnets |
| Weight | 65gWith 25cm SR wires. |
| Wire gauge and length | 18AWG, 25cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby Avenger 2810 Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
