Product overview
The BETAFPV LAVA 1S 260mAh 80C Battery supplies power for small racing drones and comes as a pack of five batteries. Each LiHV battery measures 54*11*6.5mm and weighs 7.11g, giving integrators concrete dimensions and mass for battery accommodation. Its electrical specification combines 260mAh capacity, 3.8V voltage, 0.98Wh energy and an 80C discharge rating. A BT2.0 connector provides the electrical interface; installation planning must account for that connection and the battery’s physical envelope. The supplied configuration consists of the five batteries.
The battery uses Z-Folding construction, with a stated 5% energy density increase over winding construction at the same volume and a 0.2V higher discharge platform under equivalent loads. Charging requires a charger designed for lithium polymer/Li-ion batteries, supervision and separation from flammable materials. The LiHV charging ceiling is 4.35V per cell, and discharge must remain at or above 3V per cell under load. For long-term storage, maintain 3.8V–3.9V; fully charged batteries must not be stored for more than three days.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | BETAFPV LAVA 1S 260mAh 80C Battery (5PCS) |
| Capacity | 260mAh |
| Dimensions | 54*11*6.5mm |
| Weight | 7.11g/pcsPer battery. |
| Energy | 0.98Wh |
| Discharge rating | 80C |
| Battery type | LiHV |
| Voltage | 3.8V |
| Connector | BT2.0 Connector |
| Supplied configuration | 5 × LAVA 1S 260mAh 80C batteries |
| Cell construction | Z-Folding Process |
| Energy density improvement | 5% higherCompared with a Winding Process battery of the same volume. |
| Discharge platform difference | 0.2V higherCompared with a Winding Process battery under equivalent loads. |
| Maximum charging voltage | 4.35V per cellLiHV battery; per cell. |
| Discharge voltage limit | Do not discharge below 3V per cellUnder load; per cell. |
| Storage voltage | 3.8V–3.9VLong-term storage. |
| Storage duration limit | No more than 3 daysFully charged batteries. |
| Charger and handling requirements | Use a charger designed for lithium polymer/Li-ion batteries; supervise charging and keep away from flammable and explosive materials.During charging. |
| Initial charging | Fully charge before useNew battery; before use. |
| Physical handling limitations | Do not disassemble, crush, short circuit or expose to ignition sources; do not use deformed or swollen batteries. |
Ask for the BETAFPV LAVA 1S 260mAh 80C Battery (5PCS) price ↑
