ChinaDrone.Request a quote ↗
COMPONENT

Boslipo P7 Version 8000mAh 95C 3/4/6/8S FPV Battery

By Shenzhen BBR New Energy Technology Inc ↗

The Boslipo P7 Version 8000mAh 95C FPV Battery offers 3S1P, 4S1P, 6S1P, and 8S1P configurations with XT60, XT90H, EC5, or AS150 plug options. Its handling requirements include supervised charging, cell-voltage limits, a post-discharge rest interval, monthly cycling, and specified storage and transport conditions.

Get a free sourcing quote for Boslipo P7 Version 8000mAh 95C 3/4/6/8S FPV Battery

Get a free quote

ProductBoslipo P7 Version 8000mAh 95C 3/4/6/8S FPV Battery
Capacity8000mAh
C rating95C
3S1P option8000mAh 95C 3S1P 14.8V3S1P configuration.
4S1P option8000mAh 95C 4S1P 14.8V4S1P configuration.
6S1P option8000mAh 95C 6S1P 22.2V6S1P configuration.

Product overview

The Boslipo P7 Version is an FPV battery with 8000mAh capacity and a 95C rating. Its configuration options are 3S1P at 14.8V, 4S1P at 14.8V, 6S1P at 22.2V, and 8S1P at 29.6V. Plug choices comprise XT60, XT90H, EC5, and AS150. Charging must remain supervised, with a maximum voltage of 4.2V per cell. After discharge, allow at least 5 minutes of rest before recharging, and avoid deep discharge: no-load voltage should remain greater than 3.5V per cell.

Charge the battery only when use is intended shortly afterward, and avoid frequent high-current charging unless necessary. A complete charge-discharge cycle is required at least once per month for cell health. Long-term storage calls for 3.85V per cell at 5-28°C. Avoid high-temperature environments, storage at 4.2V per cell, and extended storage below 3.7V per cell. When transporting the battery on public conveyances, discharge it to 3.6V per cell.

Specifications

SpecificationValue & conditions
ProductBoslipo P7 Version 8000mAh 95C 3/4/6/8S FPV Battery
Capacity8000mAh
C rating95C
3S1P option8000mAh 95C 3S1P 14.8V3S1P configuration.
4S1P option8000mAh 95C 4S1P 14.8V4S1P configuration.
6S1P option8000mAh 95C 6S1P 22.2V6S1P configuration.
8S1P option8000mAh 95C 8S1P 29.6V8S1P configuration.
Plug optionsXT60, XT90H, EC5, AS150
Charging supervisionNever leave batteries unattended.During charging.
Nominal cell voltage3.7VPer cell.
Maximum charge voltageMust not exceed 4.2V.Per cell during charging.
Full-charge storage restrictionDo not store at 4.2V per cell.During storage.
Heat restrictionAvoid high-temperature environments.During storage or when leaving batteries.
Rest intervalAt least 5 minutes.After discharge, before charging.
Discharge voltage requirementAvoid deep discharge; no-load voltage should be greater than 3.5V.Per cell, measured without load.
Charging timingOnly charge when use is intended shortly afterward.
Fast-charging limitationAvoid frequent high-current (fast) charging unless necessary.During high-current charging.
Maintenance cyclePerform a complete charge-discharge cycle at least once per month.
Low-voltage storage restrictionNever store below 3.7V per cell for extended periods.During extended storage.
Long-term storage voltage3.85V per cellDuring long-term storage at 5-28°C.
Long-term storage temperature5-28°CDuring long-term storage at 3.85V per cell.
Transport voltageDischarge to 3.6V per cell.When transporting batteries on public conveyances.

Ask for the Boslipo P7 Version 8000mAh 95C 3/4/6/8S FPV Battery price ↑

Related guides

EV-PEAK EN3 battery charger resting on an open hand
Component

EV-PEAK EN3 Battery Charger

EV-PEAK

The EV-PEAK EN3 is a compact AC-powered RC battery charger rated at 30W and 3.5A for 1-8-cell NiMH/NiCd packs. It combines automatic charging startup, LED status indication, an AC input port and a balance port, with reverse polarity and short-circuit protection for battery charging applications.

GEPRC PDB Hexacopter Power Distribution Board with gold solder pads and a white connector
Component

GEPRC PDB Hexacopter Power Distribution Board

By GEPRC

The GEPRC PDB Hexacopter Power Distribution Board is a six-channel power distribution component for hexacopter integration. It accepts 3–8S LiPo input, supports an on-board current meter, and measures 53x53mm. The package includes capacitors, XT90+ connectors with wire, a flight controller connection cable and damping balls.

Mugin 3L Fuel Tank with a white body, circular top connection plate and three yellow hoses
Component

Mugin 3L Fuel Tank

Mugin

The MUGINUAV Mugin 3L Fuel Tank is a multipurpose fuel-system component for UAVs, model aircraft and other fuel-powered equipment. It combines a low-profile, blow-molded HDPE body with side mounting projections and grouped top connections. Its nominal capacity is 3 L, and installation requires clearance for hoses, the connection plate and servicing access.

CUAV PMU 2 Lite power manager units with silver finned housings and red and black cables
Component

CUAV PMU 2 Lite Power Manager Unit

By CUAV

The CUAV PMU 2 Lite Power Manager Unit provides power delivery and voltage/current monitoring for unmanned systems through CAN. It combines non-contact current sensing, an aluminum alloy housing and factory calibration. Two output configurations offer different input ranges and connectors; continuous operation at 130A requires good heat dissipation.

KEEP EXPLORING

Similar products

Browse all products ↗