ChinaDrone.Request a quote ↗
COMPONENT

Boslipo P7 Version 1850mAh 150C FPV Battery

By Shenzhen BBR New Energy Technology Inc ↗

The BosLipo P7 Version 1850mAh 150C FPV Battery comes in 4S1P 14.8V and 6S1P 22.2V configurations, both with XT60 plugs. Both options share the same capacity and C rating, with specific per-cell charging, discharge, storage and transport requirements.

Get a free sourcing quote for Boslipo P7 Version 1850mAh 150C FPV Battery

Get a free quote

Boslipo P7 Version 1850mAh 150C FPV battery, 6S 22.2V variant with XT60 connector
Boslipo P7 Version 1850mAh 150C FPV battery, 6S 22.2V variant with XT60 connector
ProductBoslipo P7 Version 1850mAh 150C FPV Battery
Capacity1850mAh
C rating150C
Battery option1850mAh, 150C, 4S1P, 14.8V, XT60 plug4S1P configuration.
Battery option1850mAh, 150C, 6S1P, 22.2V, XT60 plug6S1P configuration.
Nominal voltage3.7VPer cell.

Product overview

The BosLipo P7 Version 1850mAh 150C FPV Battery is offered in two pack configurations. The 4S1P option is rated at 14.8V, while the 6S1P option is rated at 22.2V; both carry an 1850mAh capacity, a 150C rating and an XT60 plug. Each cell has a nominal voltage of 3.7V. Charging must remain supervised, with voltage limited to a maximum of 4.2V per cell. After discharge, the battery must rest for at least five minutes before charging again.

Handling requirements include avoiding deep discharge and keeping no-load voltage greater than 3.5V per cell. Charge only when use is intended shortly afterward, and avoid frequent high-current charging unless necessary. A complete charge-discharge cycle is required at least once per month. For long-term storage, maintain 3.85V per cell at 5-28°C; do not store at 4.2V per cell or below 3.7V per cell for extended periods. Avoid high-temperature environments, and discharge to 3.6V per cell for transport on public conveyances.

Specifications

SpecificationValue & conditions
ProductBoslipo P7 Version 1850mAh 150C FPV Battery
Capacity1850mAh
C rating150C
Battery option1850mAh, 150C, 4S1P, 14.8V, XT60 plug4S1P configuration.
Battery option1850mAh, 150C, 6S1P, 22.2V, XT60 plug6S1P configuration.
Nominal voltage3.7VPer cell.
Maximum charge voltageMust not exceed 4.2VPer cell, during charging.
Charging supervisionNever leave unattendedDuring charging.
Full-charge storage restrictionDo not store at 4.2V per cellDuring storage.
Heat exposure restrictionAvoid storing or leaving batteries in high-temperature environments
Rest intervalAt least 5 minutesAfter discharge, before charging.
Discharge voltage limitGreater than 3.5V; avoid deep dischargePer cell, measured with no load.
Charging timingCharge only when use is intended shortly afterwardWhen charging for subsequent use.
Fast-charging restrictionAvoid frequent fast charging unless necessaryHigh-current charging.
Maintenance cycleOne complete charge-discharge cycle at least once per monthFor cell-health maintenance.
Low-voltage storage restrictionNever store below 3.7V per cell for extended periodsPer cell, during extended storage.
Storage voltage and temperature3.85V per cell at 5-28°CLong-term storage.
Transport voltageDischarge to 3.6V per cellTransport on public conveyances.

Ask for the Boslipo P7 Version 1850mAh 150C FPV Battery price ↑

Related guides

LP4 tethered power system with a wheeled ground station and cable connected to a quadcopter
Component

TINTEC LP4 Tethered System

TINTEC

The TINTEC LP4 is a portable 1kW tethered UAV power system for sustained hovering and fixed-area industrial missions. It combines a wheeled, folding ground station, compact airborne module and automatically retracting 55m cable, with accessory expansion space and integrated lighting. Operation requires compatible aircraft integration, suitable ground power and approved operating conditions.

Grepow Tattu 3.0 14S 19000mAh 51.8V 25C smart drone battery with silver housing and carry handle
Component

Tattu 3.0 14S 19000mAh 51.8V 25C Lipo Smart Drone Battery

By Grepow

Grepow’s Tattu 3.0 14S 19000mAh 51.8V 25C is a smart lithium-polymer battery for commercial drones, including agricultural, surveying, delivery and eVTOL applications. It combines a 14S1P pack, battery management system, aluminum housing and drawer-slide installation. The pack weighs 7900g ±20g and specifies a maximum continuous current of 150A.

GEPRC 6S 1550mAh 60C battery with power leads and connectors
Component

GEPRC 6S 1550mAh 60C Battery

By GEPRC

The GEPRC 6S 1550mAh 60C Battery is a Li-HV power pack intended for 3-5 inch drones. Supplied as a single battery, it combines a 6S1P configuration, 22.8V nominal voltage and 35.34WH energy rating in a 193.0g package, with defined charging, discharge and storage limits.

SKYRC e3 balance charger with black vented housing and three status LEDs
Component

SKYRC e3 Battery Charger

SKYRC

The SKYRC e3 is a compact AC balance charger for 2–3-cell LiPo batteries, supplied with a power cord and manual. It combines a built-in balance module, maximum 1.2A charging current, LED status and fault indications, and short-circuit and reverse-connection protection in an 88x57x35mm, 103g package.

KEEP EXPLORING

Similar products

Browse all products ↗