Product overview
The GEPRC 6S 1550mAh 60C Battery supplies electrical power for 3-5 inch drones and is also intended for toys, boats and quadcopters. Supplied as one battery pack, it uses Li-HV chemistry in a 6S1P configuration, with 1550mAh capacity, 22.8V nominal voltage and 35.34WH energy. Installation space must accommodate dimensions of 41*34*76(mm) and a weight of 193.0g. Its specified connections are XT60 for charging and X60 for discharge. Maximum continuous discharge is 60C, with a maximum burst rating of 120C.
Charging specifications recommend 1C and allow up to 3C; additional charging guidance recommends 1-1.5C. Recommended chargers are the HOTA D6 PRO, ISDT 608AC and ToolkitRC M6D. Charge within 0-45°C and let a recently used pack cool below 45°C first. The full-charge limit is 4.35V per Li-HV cell, while discharge must not take any cell below 3.5V. Over-discharge can damage the battery and cause swelling. Charging must remain attended, with the correct battery type selected.
The discharge operating temperature range is -20-60°C, while storage requires -20-35°C. Both working and storage humidity are specified as 65%RH +/-20%. For extended storage, maintain 3.80V-3.85V per cell and perform a charge-discharge activation within 3 months. Keep the pack away from flames and flammable materials during charging, and do not reverse its polarity or alter its wiring. Following a collision, remove the battery and inspect both the pack and connector; a ruptured battery must not be reused.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC 6S1550mAh60C |
| Model number | GEP15506S60AHV |
| Capacity | 1550mAh |
| Cell configuration | 6S1P |
| Nominal voltage | 22.8V |
| Battery type | Li-HV |
| Energy | 35.34WH |
| Dimensions | 41*34*76(mm) |
| Weight | 193.0g |
| Maximum continuous discharge rate | 60CContinuous discharge. |
| Maximum burst discharge rate | 120CBurst discharge. |
| Charge connector | XT60 |
| Discharge connector | X60 |
| Recommended charging current | 1CCharging. |
| Maximum charging current | 3CCharging. |
| Working temperature for charging | 0-45°CCharging. |
| Working temperature for discharging | -20-60°CDischarging. |
| Working humidity | 65%RH +/-20%Operation. |
| Storage temperature | -20-35°CStorage. |
| Storage humidity | 65%RH +/-20%Storage. |
| Maximum charging voltage comparison | Li-HV: not more than 4.35v per cell; LiPo: not more than 4.2V per cell.Single-cell full-charge limits for Li-HV and LiPo batteries. |
| Charging-rate guidance | Supports up to 3C; recommended rate 1-1.5C, described as having essentially no effect on battery service life.Charging. |
| Recommended chargers | HOTA D6 PRO, ISDT 608AC and ToolkitRC M6D. |
| Intended drone size | 3-5 inch drones. |
| Applications | Toys, boats and quadcopters. |
| Included equipment | 1 x GEPRC 6S 1550mAh 60C Battery.Supplied configuration. |
| Maximum full-charge voltage per cell | Not more than 4.35v per cell.Li-HV cells during charging. |
| Minimum discharge voltage per cell | Cannot be lower than 3.5V; over-discharge can damage the battery and cause swelling.LiPo and Li-HV cells during discharge. |
| Storage voltage and maintenance | Maintain 3.80V-3.85V per cell and perform a charge-discharge activation within 3 months.Long-term storage. |
| Cooling before charging | Allow the battery to cool below 45°C before charging.Charging after use. |
Request a quote for GEPRC 6S 1550mAh 60C Battery
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
