ChinaDrone.Request a quote ↗
COMPONENT

Boslipo P7 Version 1480mAh 150C 6S FPV Battery

By Shenzhen BBR New Energy Technology Inc ↗

The Boslipo P7 Version 1480mAh 150C 6S FPV Battery is an FPV battery pack supplied with a 6S1P configuration, 22.2V pack voltage and XT60 plug. Its handling requirements include specific per-cell voltage limits, a post-discharge rest interval, and defined long-term storage voltage and temperature.

Get a free sourcing quote for Boslipo P7 Version 1480mAh 150C 6S FPV Battery

Get a free quote

ProductBoslipo P7 Version 1480mAh 150C 6S FPV Battery
Capacity1480mAh
C rating150C
Cell configuration6S1P
Pack voltage22.2V
ConnectorXT60 plug

Product overview

The Boslipo P7 Version 1480mAh 150C 6S FPV Battery is a battery pack for FPV use, supplied in a 6S1P configuration with a 1480mAh capacity, 150C rating, 22.2V pack voltage and XT60 plug. Its nominal cell voltage is 3.7V, and charging must not exceed 4.2V per cell. Charge only when use is planned shortly afterward, keep charging attended, and allow at least five minutes of rest after discharge before recharging. Frequent high-current charging should be avoided unless necessary.

Battery handling also requires limits on discharge and storage. Avoid deep discharge and keep the no-load voltage above 3.5V per cell. Do not store the battery at 4.2V per cell or leave it in high-temperature environments, and never store it below 3.7V per cell for extended periods. For long-term storage, maintain 3.85V per cell at 5-28°C. Complete a charge-discharge cycle at least monthly to maintain cell health, and discharge to 3.6V per cell when transporting on public conveyances.

Specifications

SpecificationValue & conditions
ProductBoslipo P7 Version 1480mAh 150C 6S FPV Battery
Capacity1480mAh
C rating150C
Cell configuration6S1P
Pack voltage22.2V
ConnectorXT60 plug
Nominal cell voltage3.7VPer cell.
Maximum charge voltageMust not exceed 4.2VPer cell, during charging.
Charging supervisionNever leave the battery unattendedDuring charging.
Full-charge storage restrictionDo not store at 4.2V per cellDuring storage.
Heat exposure restrictionAvoid high-temperature environmentsDuring storage or when left unused.
Rest intervalAt least 5 minutesAfter discharge, before charging.
Discharge voltage restrictionAvoid deep discharge; no-load voltage should be greater than 3.5VPer cell, measured without load.
Charging timingOnly charge when use is intended shortly afterwardWhen preparing for use shortly after charging.
Fast-charging restrictionAvoid frequent high-current chargingUnless necessary.
Maintenance cyclingOne complete charge-discharge cycle at least once per monthFor cell health maintenance.
Low-voltage storage restrictionNever store below 3.7V for extended periodsPer cell, for extended storage.
Long-term storage voltage3.85VPer cell, during long-term storage at 5-28°C.
Long-term storage temperature5-28°CDuring long-term storage at 3.85V per cell.
Transport discharge voltage3.6VPer cell, when transporting on public conveyances.

Ask for the Boslipo P7 Version 1480mAh 150C 6S FPV Battery price ↑

Related guides

HOBBYWING UBEC 10A (2-6S) regulator with attached wires and switch
Component

HOBBYWING UBEC 10A (2-6S)

HOBBYWING

The HOBBYWING UBEC 10A (2-6S) is an external switching-mode DC-DC regulator for powering receivers and other electronics from a 2-6S LiPo battery. Intended particularly for large helicopters and fixed-wing aircraft, it offers four adjustable output voltages, a 10A continuous rating and a weight of 36g.

Grepow Tattu 4.0 18S LiPo 30Ah 68.4V smart drone battery with gray ribbed housing and black carry handle
Component

Tattu 4.0 18S Lipo 30Ah 68.4V Smart UAV Drone Battery

By Grepow

Grepow’s Tattu 4.0 18S Lipo 30Ah 68.4V Smart UAV Drone Battery is a 2052 Wh power pack designed for 70–100kg MTOW heavy-payload drones. It combines a sealed aluminum housing and drawer-slide installation with integrated battery management, DroneCAN communication, Bluetooth monitoring and support for 5C fast charging.

ZHT KP63 power distribution board with mounted electronic components on a green circuit board
Component

ZHTAERO ZHT KP63 Power Distribution Board

ZHTAERO

The ZHT KP63 is a 130g power distribution board with four battery interfaces and integrated sensing, control and power-conversion functions. It operates at 30-63V (6-14S), provides 5.4V and 12V outputs, and has a maximum continuous current rating of 140A.

DYS XBRF3 flight controller and power distribution board.
Component

DYS XBRF3 flight controller board

By DYS

The DYS XBRF3 is a quadcopter flight-controller board integrating F3 control, OSD, UBEC and power distribution on one PCB. It provides firmware-update connections and peripheral expansion connectors, accepts 6–16.8 V (2–4S), and specifies a 5 V / 3 A output. A pressure sensor and compass are associated with the advanced integrated edition.

KEEP EXPLORING

Similar products

Browse all products ↗
Mugin 3L Fuel Tank with a white body, circular top connection plate and three yellow hoses
Batteries & charging

Mugin 3L Fuel Tank

Mugin

The MUGINUAV Mugin 3L Fuel Tank is a multipurpose fuel-system component for UAVs, model aircraft and other fuel-powered equipment. It combines a low-profile, blow-molded HDPE body with side mounting projections and grouped top connections. Its nominal capacity is 3 L, and installation requires clearance for hoses, the connection plate and servicing access.