Find aircraft and components for your next project.
The TINTEC TL2S is a compact payload-release accessory for the Max4T platform, combining one hook, PSDK control and belly mounting. It measures ≤ 60 × 40 × 20 mm and weighs 50 ± 5 g. Capacity is up to 1 kg; routine payloads within 500 g are recommended, subject to aircraft limits, installation, battery, environment and applicable regulations.
The TINTEC TL3F is a compact dual-channel payload release accessory for DJI Matrice 4T and Matrice 4E drones. It combines independent release control, status feedback and integrated warning lights with quick belly mounting. Capacity reaches 2kg per channel and 4kg total, subject to the aircraft’s flight and safety limits.
The TK400 Drone Warning Thrower System is a compact UAV payload for aerial signaling and payload release. It integrates a red-blue strobe, downward camera, and real-time weight display in a 400g module. SkyPort connectivity and tool-free quick-release mounting support integration with DJI M300, M350, and M400 platforms, with maximum load-bearing of 5kg.
The TINTEC TL2P UAV Payload Drop System is a compact, 153g drone accessory for small-load aerial delivery. Two hooks carry up to 500g each, with a 1kg total limit. A light sensor responds to drone lighting signals, enabling single-hook or full release through a quick-mount, plug-and-play installation.
Dongguan Tintec Technology Co., Ltd’s TM-12 Drone Megaphone System is a quick-release aerial communication payload for industrial UAVs. It combines live voice transmission, recorded audio, text-to-speech and an emergency alarm in a 476 g assembly, with a 24 V supply and an air-to-ground broadcast reach of up to 500 m under optimal conditions.
TINTEC’s XF-40 UAV Fire Water Gun System combines a 90 m hose and 2.5 m aircraft-mounted wand for ground-fed water or compatible foam delivery. Its approximately 10–15 m spray range varies with operating pressure, wind, nozzle direction, and site conditions. The kit requires integration with a suitably configured industrial UAV and compatible ground supply.
The Dongguan Xiechuang Composite Materials F40 is a UAV frame for industry applications. Its purpose is to serve as the structural frame of an unmanned aircraft, with F40 identifying the manufacturer’s model for this product.
The Dongguan Xiechuang Composite Materials F60 is a UAV frame for industry applications. It is identified as a structural frame, with no specified dimensions, integration space, included equipment, or operating limits defining its configuration or capabilities.
The Yattox 4000mAh 6S 120C LiPo Battery for RC is a 22.2V, 6S1P power pack for compatible RC systems, including aircraft and drones. It provides 88.8Wh capacity, weighs approximately 571g and measures 137 × 47.3 × 44.7mm. Integration requires suitable electrical limits, installation space and resolution of the TBD connector.
The YATTOX 6S 15000mAh 22.2V LiPo Battery is a UAV battery pack with 15Ah capacity, 333Wh nominal energy and a 10C label rating. Selection depends on aircraft voltage and current requirements, charging equipment, weight allowance and mounting space, with mechanical and connector details requiring confirmation for the supplied configuration.
The YATTOX 6S 20000mAh 22.2V LiPo Battery is a UAV power pack with 20Ah capacity and 444Wh nominal energy. It has an XT90 connector, a 187 × 45.4 × 77mm envelope and 1,260g labeled weight. Integration requires adequate mounting clearance and electrical support for the aircraft’s voltage and load requirements.
The Yattox 7000mAh 7S 40C LiPo RC Battery is a 25.9V, 7S1P power pack for compatible RC, FPV and custom 7S systems. It combines 181.3Wh energy with a 40C continuous discharge rating. Weight, dimensions and connector remain TBD, so installation fit and connection requirements still require resolution.
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry