Find aircraft and components for your next project.
The Scorpion HKIV-5035-500KV (8mm 55mm) is a 785 g electric propulsion motor with a 12-arm, 10-pole architecture and 500 KV rating. It supports up to 12s LiPo, with continuous limits of 120 amps and 5328 watts; higher peak ratings are limited to five seconds.
The Scorpion IM-6008-140kv is an electric propulsion motor for multirotor UAVs, intended for 12s operation. It weighs 200g including 20cm of wire and incorporates a 60.0mm stator, 8mm steel shaft and dual NMB bearings. Ratings include 844w continuous power and 7.2kg maximum thrust.
The Scorpion IM-6008-140kv is a multirotor UAV propulsion motor configured for 12s operation and recommended 22" - 23" propellers. It combines a 24N28P architecture, dual NMB bearings and an 8mm steel shaft. Weight is 200g including 20cm wire, with recommended thrust per arm of 1.5kg - 3.25kg.
The Scorpion IM-6008-300kv is a multirotor UAV propulsion motor with recommended 21" - 22" propellers and a 6s supply. It combines a 24N28P configuration, an 8mm steel shaft and dual NMB bearings. Recommended thrust is 1.8kg - 3.25kg per arm, with maximum thrust of 6.9kg.
The Scorpion IM-8008 is a motor in the company's industrial multirotor propulsion series.
The Scorpion IM-8008-100kv is a multirotor UAV propulsion motor intended for 27" - 28" propellers and a recommended 12s supply. Its 36N40P architecture includes an 80.0mm stator, an 8mm steel shaft and dual NMB bearings. It weighs 279g including 20cm wire, with continuous power specified at 1065w.
The Scorpion IM-8008C-100kv is a multirotor UAV propulsion motor for 27–28-inch propellers and a recommended 12s supply. Its architecture includes an 80.0mm stator, dual NMB bearings and an 8mm steel shaft. Weight is 284g including 20cm wire, with recommended thrust per arm of 2.5–4.75kg.
The Scorpion IM-8012-115kv is a multirotor UAV propulsion motor with a 36N40P configuration, dual bearings and an ultra-hardened steel shaft. Its model-specific table recommends 27" - 28" propellers and 12s supply. Published thrust figures lack measurement conditions, and the printed lower voltage endpoint is unclear.
The Scorpion IM-8012-115kv is a multirotor UAV propulsion motor with a 36N40P configuration, dual NMB bearings and an 8mm steel shaft. It specifies a recommended 12s supply and 27" - 28" propellers, with 1600w continuous power and recommended thrust of 3.68kg - 7.0kg per arm.
The Scorpion IM-8016-100kv is a multirotor UAV propulsion motor designed for 30–32-inch propellers and a recommended 12s supply. It combines a 36N40P configuration, dual bearings and an ultra-hardened steel shaft, with recommended thrust of 4.0–8.25kg per arm and maximum thrust of 16.5kg.
The Scorpion SII-5525 series Stand-Off is a four-piece motor mounting accessory for giant-scale electric airplanes. Designed around the SII-5525 motor, it provides 90mm stand-offs with adjustment washers for cowl positioning. The package includes M5 mounting hardware and spacers, with a specified weight of 180g.
The Scorpion SII-65 & SII-5535 series Stand-Off is a four-piece motor mounting accessory for giant-scale electric airplanes. Its 100mm stand-offs and supplied adjustment washers help position compatible Scorpion motors within the cowl, using specified gas-engine installation lengths as references. The package includes mounting screws and M6 spacers.
industry
industry
industry
industry
industry
industry
industry
industry
industry