Explore drone components and find options for your aircraft.
The GEPRC 6S 1550mAh 60C Battery is a Li-HV power pack intended for 3-5 inch drones. Supplied as a single battery, it combines a 6S1P configuration, 22.8V nominal voltage and 35.34WH energy rating in a 193.0g package, with defined charging, discharge and storage limits.
The GEPRC 6S 380mAh 90/180C HV 3.8V/4.35V LiHV Battery is a power pack intended for 2-3 inch drones. Supplied as one battery, it combines a 6S1P configuration, 22.8V nominal voltage and XT30 connections in a 62.6g package. Integration must accommodate its dimensions, LiHV charging requirements and per-cell voltage limits.
The GEPRC 868MHz/915MHz 2.4G Tri-Band Stick Antenna is a single supplied antenna accessory for omnidirectional reception across three frequency bands. It combines a linearly polarized PCB element, an oval ABS housing and an SMA connector in a 172mm, 11.2g assembly, with reception optimized at a vertical angle.
The GEPRC 915MHz/2.4GHz T Antenna is a quadcopter receiver antenna accessory available in T and Mini T formats. Three specified configurations differ in frequency range, antenna length, cable length and weight. Each uses an ipex1 connector and specifies 2dBi gain. The package contains one antenna, and receiver compatibility requires matching frequency and connector.
The GEPRC CEP-STABLE 12A Whoop Stack is an electronics package for small indoor Whoop and toothpick UAV builds. It combines F4 flight control, 12A ESC capability and a selectable-power 5.8GHz video transmitter. Its 2–4S LiPo support, compact M2 mounting pattern and supplied installation hardware suit integration into a separately assembled aircraft.
The GEPRC CineLog35 Action2 Camera Mount is a black camera mounting accessory for the CineLog35. The kit contains an action mount, base mount and screw set, with a stated weight of 17.0g including the base. An Action2 Camera is not included.
The GEPRC CineLog35 Insta360 GO2/Caddx Peanut Camera Mount is a black, 2.9g camera accessory in the 3D printed parts range. Supplied as one mount, it fits five listed airframes; the Insta360 GO2, Caddx Peanut and CineLog35 are excluded.
The GEPRC D63-3 (2.5”) CineWhoop Propeller-2 Pairs contains two pairs of black PC propellers for the CineLog25 and other 2.5 inch drones. Specifications include a 63.5mm diameter, 3-inch pitch, 1.4g weight and a 1.5mm three-hole center configuration, with a suitable motor range of 1105-1108.
The GEPRC D90-3 (3.5”) is a PC propeller for 3.5 inch drones, supplied as two pairs. It combines a 90mm/3.5” diameter with 3inch pitch and 2.3g weight. Mounting specifications list M5 and adapter-based 1.5mm T Mount, with an adaptive motor range of 2203-2306.
The GEPRC DJI O3 Air Unit ND Filters provide UV, ND and polarizing filter choices for the O3 Air Unit camera and DJI Avata. They combine a 7075-T6 aluminum alloy frame, an ultra-thin lens and two mounting methods. Individual filters and sets are offered, with supplied filters determined by the selected package.
The GEPRC DJI O4 Air Unit Camera Module Housing Kit is an injection-molded PC accessory for protecting and mounting the DJI O4 Air Unit camera module. It weighs 1.8g, provides 14mm mounting hole spacing for most lightweight tinywhoops, and includes front and rear covers plus fastening hardware. Rear openings support cooling and weight reduction.
The GEPRC ELRS 915M/2.4G C3 Gemini Xrossband Receiver is a compact ExpressLRS radio component with dual-band operation, multiple serial output protocols and WiFi firmware updates. Supplied with two antennas and an installation cable, it requires GemX TX for switching among its Gemini and combined dual-band modes.
Share your requirements or purchase list for prices and product options.
No account, no sign-up. By sending you agree we may contact you about this request (privacy).
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry