Explore drone components and find options for your aircraft.
The Foxeer 7pin JST 1.25 Cable is a servo cable accessory for Foxeer Arrow V3, Monster V2 and Nightwolf V2 cameras. Identified by SKU PA1326, the cable has seven pins and a JST 1.25 connector designation.
The Foxeer Arrow Micro Pro 600TVL FPV Camera with OSD is a 19 × 19mm analog camera combining a Sony CCD sensor and Nextchip DSP. It weighs 5.3g excluding cable, accepts 5V–40V input, and offers PAL/NTSC and two lens configurations. Integrated flight OSD displays name, voltage and time.
The Foxeer Arrow Mini Pro is a compact, plastic-cased analog FPV camera with a Sony CCD sensor, Nextchip processing and built-in flight OSD. PAL/NTSC and lens choices define its video configuration and viewing coverage. Its 22 × 22mm body, bracket-expanded footprint and 5V–40V input range provide concrete mounting and electrical integration parameters.
The Foxeer BOX 2 is a compact 4K HD action FPV camera for recording video and still images. Its cube-shaped housing combines a wide-angle glass lens, built-in battery and wired and wireless connections. Adhesive mounts and a case are supplied, while recording requires a separately supplied U3-or-above SD card.
The Foxeer Camera Micro to Standard Size Extension Bracket 19mm to 28mm is a camera mounting accessory for adapting micro cameras to standard camera size. Listed fitment includes Mix 1/2 and micro cameras, excluding the full-cased Predator Micro M8/M12.
The Foxeer Cat Camera Case Full Size is a camera case accessory identified by SKU PA1437. It is offered with black, red or white case color selections and carries the Full Size product designation.
The Foxeer F405 V2 (Plug) FC Reaper 55A ESC 8S Stack is a UAV electronics assembly pairing a sensor-equipped Betaflight flight controller with a four-channel ESC. It provides peripheral connections, dual BEC outputs on the flight controller and 30.5mm mounting patterns, with both boards and integration cables supplied in the stack package.
The Foxeer F722 Mini V4 FC ICM42688 is a compact FPV flight controller with an STM32F722RET6 processor and BetaFlight firmware. The 26X26mm, 4g board supports 2~6S LiPo power, four UART sets, BF OSD and flash logging. Supplied equipment consists of one controller and four rubber columns.
The Foxeer F722 V3 Flight Controller X8 DJI Type-C is an 8 g UAV flight controller with an STM32F722RET6 CPU, six UART sets and dual BEC outputs. Supplied with four rubber columns, it supports 3–6S LiPo power and requires CLI configuration for X8 operation.
The Foxeer F722 V3 Mini Flight Controller 20*20mm BetaFlight is a 4 g flight-control board with an STM32F722RET6 processor, four UART sets and BF OSD. Its 26 × 26 mm footprint accommodates 20 × 20 mm mounting, and the package supplies one controller with four rubber columns.
The Foxeer F722 V4 Dual BEC 5V/10V HV 8S Mini Flight Controller combines an STM32F722RET6 processor, ICM 42688-P gyro and dual regulated power outputs on a 30*31mm board. Supplied with four rubber columns, it provides flight-control hardware for integration into a UAV build.
The Foxeer F722 V4 FC ICM42688 DPS310 is a compact FPV flight controller combining an STM32F722RET6 processor with gyroscope and barometer sensors. Its 37 × 37 mm board provides six UART sets, dual BEC outputs and Type-C USB. The package contains the controller and four rubber columns.