ChinaDroneRequest a quote →
STEAM FD005-8 FLYDRAGONpro gold MPU6000 flight controller with two antennasSTEAM FD005-8 FLYDRAGONpro gold MPU6000 flight controller with two antennas

STEAM FD005-8

The STEAM FD005-8 FLYDRAGONpro is a helicopter gyroscope running open-source Rotorflight firmware based on Betaflight 4.5. It integrates an STM32F722RET6 controller, 128MB blackbox memory and a dual-antenna ELRS 2.4G receiver, with self-leveling, semi-self-leveling, 3D and rescue flight modes in a 45x27x14.5mm, 27g unit.

XinyueDrone flight controller
Weight
27 g
Dimensions
45x27x14.5 mm

Get a free quote

Product overview

The STEAM FD005-8 FLYDRAGONpro helicopter gyroscope combines an STM32F722RET6 controller with MPU-6000 / ICM-42688-P gyro hardware. Its open-source Rotorflight firmware is based on Betaflight 4.5 and incorporates helicopter-specific functions, with ideas and code also drawn from Heliflight3D. Self-leveling, semi-self-leveling, 3D and rescue modes provide its flight-control options. Integrated hardware includes W25N01G blackbox memory with 128MB capacity, an SPL06-001 barometer on I2C2, WS2812B color lighting and a 5V active buzzer. The unit measures 45x27x14.5mm and weighs 27g.

A built-in ELRS dual-antenna 2.4G receiver connects through serial port 1, alongside support for the listed external receiver protocols. Connections include Type-C USB, UART2, UART3, UART5, I2C1, CH1-CH2-CH3-TAIL servo channels, an RPM input and an AUX channel. The BEC voltage range is 5-18V, with a 5V-2A power output. ADC inputs cover battery voltage at 0-62V, BEC voltage at 0-30V and bus voltage at 0-8V. Factory firmware versions are RF2 v2.1.1 for the controller and v3.5.3 for the receiver.

Flight control & navigation

Specifications

STEAM FD005-8 specifications
SpecificationValue & conditions
ModelFD005-8
Firmware platformOpen-source Rotorflight firmware based on Betaflight 4.5
Flight modesSelf-leveling, semi-self-leveling, 3D and rescue modes
Main controllerSTM32F722RET6
GyroscopeMPU-6000 / ICM-42688-P
Blackbox memoryW25N01G (128MB)
BarometerSPL06-001 (I2C2)
Color lightingWS2812B
Buzzer5V active buzzer
USB connectorType-C
Serial portsUART2, UART3, UART5
I2C interfaceI2C1
ADC inputsADC_BATT (0-62V), ADC_BEC (0-30V), ADC_BUS (0-8V)
Servo channelsCH1-CH2-CH3-TAIL
Speed inputRPM
Auxiliary channelAUX
Built-in receiverELRS dual-antenna 2.4G receiver (serial port 1)
External receiver supportTBS CRSF, Futaba S.BUS, Futaba S.BUS2, FrSky F.PORT, FrSky F.PORT2, FrSky FBUS, Spektrum DSM/1024, Spektrum DSM/2048, Spektrum DSMSRXL, Spektrum DSMSRXL2, ImmersionRC GHOST, Graupner SUMD, Graupner SUMH, Flysky IBUS, JR XBUS Mode A, JR XBUS Mode B, JR XBUSIRJ01, Jeti EXBUS, CPPM
BEC voltage5-18V
5V power output5V-2A
ESC protocolsPWM, ONESHOT125, ONESHOT42, MULTISHOT, BRUSHED, DSHOT150, DSHOT300, DSHOT600, PROSHOT, CASTLE
ESC telemetry supportBLHeli32, Hobbywing Platinum V4 / FlyFun V5, Hobbywing Platinum V5, Scorpion, Kontronik, OMPHobby, ZTW, APD, OpenYGE, FLYROTOR, Graupner, XDFLY
Dimensions45x27x14.5mm
Weight27g
Controller and receiver firmware versionsMain controller: RF2 v2.1.1; receiver: v3.5.3Factory firmware.

Related guides