ChinaDroneRequest a quote →
STEAM FLYDRAGONpro FD005-5 red MPU6000 helicopter flight controller with two antennasSTEAM FLYDRAGONpro FD005-5 red MPU6000 helicopter flight controller with two antennas

STEAM FD005-5

The STEAM FLYDRAGONpro FD005-5 is a red helicopter flight controller running Rotorflight firmware based on Betaflight 4.5. It combines an STM32F722RET6 processor, 128MB blackbox memory and a built-in ELRS dual-antenna 2.4G receiver, with four flight modes, servo connections, ESC protocol support and telemetry interfaces.

XinyueDrone flight controller
Weight
27 g
Dimensions
45x27x14.5 mm

Get a free quote

Product overview

The STEAM FLYDRAGONpro FD005-5 red flight controller provides helicopter control through open-source Rotorflight firmware based on Betaflight 4.5. It offers self-leveling, semi-self-leveling, 3D and rescue modes. Its hardware combines an STM32F722RET6 processor with 128MB W25N01G blackbox memory, an SPL06-001 barometer on I2C2, a WS2812B LED and a 5V active buzzer. A built-in ELRS dual-antenna 2.4G receiver connects through serial port 1, with RF2 v2.1.1 controller firmware and v3.5.3 receiver firmware installed at the factory.

Measuring 45x27x14.5mm and weighing 27g, the controller provides Type-C USB, UART2, UART3, UART5 and I2C1 connections. Servo connections comprise CH1, CH2, CH3 and TAIL, alongside an RPM input and AUX channel. BEC voltage is 5-18V, with a 5V-2A power output. Separate ADC inputs cover battery measurements from 0-62V, BEC measurements from 0-30V and bus measurements from 0-8V. External receiver support includes CRSF, S.BUS and other listed protocols, while ESC interfaces include PWM, DSHOT150/300/600 and telemetry support.

Flight control & navigation

Specifications

STEAM FD005-5 specifications
SpecificationValue & conditions
ModelFD005-5
Product identitySTEAM FLYDRAGONpro FD005-5 red flight controller
Firmware platformOpen-source Rotorflight firmware based on Betaflight 4.5
Flight modesSelf-leveling, semi-self-leveling, 3D and rescue modes
Main processorSTM32F722RET6
GyroscopeMPU-6000 / ICM-42688-P
Blackbox memoryW25N01G (128MB)
BarometerSPL06-001 (I2C2)
LEDWS2812B
Buzzer5V active buzzer
USB connectorType-C
Serial portsUART2, UART3, UART5
I2C interfaceI2C1
ADC measurement ranges
  • ADC_BATT: 0-62V;
  • ADC_BEC: 0-30V;
  • ADC_BUS: 0-8V
Servo channelsCH1-CH2-CH3-TAIL
Rotational speed inputRPM
Auxiliary channelAUX
Built-in receiverELRS dual-antenna 2.4G receiver (serial port 1)
External receiver supportTBS CRSF, Futaba S.BUS, Futaba S.BUS2, FrSky F.PORT, FrSky F.PORT2, FrSky FBUS, Spektrum DSM/1024, Spektrum DSM/2048, Spektrum DSMSRXL, Spektrum DSMSRXL2, ImmersionRC GHOST, Graupner SUMD, Graupner SUMH, Flysky IBUS, JR XBUS Mode A, JR XBUS Mode B, JR XBUSIRJ01, Jeti EXBUS, CPPM
BEC voltage5-18V
5V power output5V-2A
ESC protocolsPWM, ONESHOT125, ONESHOT42, MULTISHOT, BRUSHED, DSHOT150, DSHOT300, DSHOT600, PROSHOT, CASTLE
ESC telemetry supportBLHeli32, Hobbywing Platinum V4 / FlyFun V5, Hobbywing Platinum V5, Scorpion, Kontronik, OMPHobby, ZTW, APD, OpenYGE, FLYROTOR, Graupner, XDFLY
Dimensions45x27x14.5mm
Weight27g
Controller firmware versionRF2 v2.1.1Factory-installed firmware.
Receiver firmware versionV3.5.3Factory-installed firmware.

Related guides