Product overview
The STEAM FD005-4 FLYDRAGONpro gyroscope provides helicopter flight control through open-source Rotorflight firmware based on Betaflight 4.5. Its flight modes cover self-leveling, semi-self-leveling, 3D and rescue operation. The hardware combines an STM32F722RET6 main processor, W25N01G blackbox memory with 128MB capacity and an SPL06-001 barometer on I2C2. A dual-antenna ELRS 2.4G receiver is built in on serial port 1. Factory firmware versions are RF2 v2.1.1 for the main controller and v3.5.3 for the receiver.
Measuring 45x27x14.5mm and weighing 27g, the unit incorporates a Type-C USB connector, WS2812B LED and 5V active buzzer. Connections include UART2, UART3, UART5, I2C1, CH1-CH2-CH3-TAIL servo channels, an RPM input and an AUX channel. BEC voltage is 5-18V, with a 5V-2A power output. Voltage sensing ranges are 0-62V for ADC_BATT, 0-30V for ADC_BEC and 0-8V for ADC_BUS. External receiver interfaces, multiple ESC control protocols and ESC telemetry support provide connections for helicopter control electronics.




