ChinaDroneRequest a quote →
STEAM FD005-3 FLYDRAGONpro flight controller in a purple case with two antennasSTEAM FD005-3 FLYDRAGONpro flight controller in a purple case with two antennas

STEAM FD005-3

The STEAM FD005-3 FLYDRAGONpro is a helicopter gyro flight controller with Rotorflight firmware and a built-in ELRS dual-antenna 2.4G receiver. It combines four flight modes, 128MB blackbox memory, a barometer and extensive receiver and ESC interfaces in a 45x27x14.5mm, 27g unit.

XinyueDrone flight controller
Weight
27 g
Dimensions
45x27x14.5 mm

Get a free quote

Product overview

The STEAM FD005-3 FLYDRAGONpro helicopter gyro flight controller runs open-source Rotorflight firmware based on Betaflight 4.5, with helicopter-specific functions and self-leveling, semi-self-leveling, 3D and rescue modes. Its hardware combines an STM32F722RET6 processor, W25N01G blackbox memory with 128MB capacity and an SPL06-001 barometer on I2C2. A built-in ELRS dual-antenna 2.4G receiver connects through serial port 1. The unit measures 45x27x14.5mm and weighs 27g, with WS2812B lighting, a 5V active buzzer and a Type-C USB connection.

Connections include UART2, UART3 and UART5, I2C1, CH1-CH2-CH3-TAIL servo channels, an RPM input and an AUX channel. Voltage measurement ranges are 0-62V for ADC_BATT, 0-30V for ADC_BEC and 0-8V for ADC_BUS. BEC voltage is 5-18V, and the 5V power output is rated at 2A. External receiver support includes CRSF, S.BUS, F.PORT, DSM, GHOST and other listed protocols, alongside multiple ESC control and telemetry formats. Factory-installed firmware versions are RF2 v2.1.1 for the controller and v3.5.3 for the receiver.

Flight control & navigation

Specifications

STEAM FD005-3 specifications
SpecificationValue & conditions
ModelFD005-3
Firmware platformOpen-source Rotorflight firmware, based on Betaflight 4.5
Flight modesSelf-leveling, semi-self-leveling, 3D and rescue
Main processorSTM32F722RET6
GyroscopeMPU-6000 / ICM-42688-P
Blackbox memoryW25N01G (128MB)
BarometerSPL06-001 (I2C2)
RGB lightingWS2812B
Buzzer5V active buzzer
USB connectorType-C
Serial portsUART2, UART3, UART5
I2C interfaceI2C1
ADC measurement ranges
  • ADC_BATT: 0-62V;
  • ADC_BEC: 0-30V;
  • ADC_BUS: 0-8V
Servo channelsCH1-CH2-CH3-TAIL
Speed inputRPM
Auxiliary channelAUX
Built-in receiverELRS dual-antenna 2.4G receiver (serial port 1)
External receiver protocolsTBS CRSF, Futaba S.BUS, Futaba S.BUS2, FrSky F.PORT, FrSky F.PORT2, FrSky FBUS, Spektrum DSM/1024, Spektrum DSM/2048, Spektrum DSMSRXL, Spektrum DSMSRXL2, ImmersionRC GHOST, Graupner SUMD, Graupner SUMH, Flysky IBUS, JR XBUS Mode A, JR XBUS Mode B, JR XBUSIRJ01, Jeti EXBUS, CPPM
BEC voltage5-18V
5V power output5V-2A
ESC protocolsPWM, ONESHOT125, ONESHOT42, MULTISHOT, BRUSHED, DSHOT150, DSHOT300, DSHOT600, PROSHOT, CASTLE
Supported ESC telemetryBLHeli32, Hobbywing Platinum V4 / FlyFun V5, Hobbywing Platinum V5, Scorpion, Kontronik, OMPHobby, ZTW, APD, OpenYGE, FLYROTOR, Graupner, XDFLY
Dimensions45x27x14.5mm
Weight27g
Controller firmware versionRF2 v2.1.1Factory-installed firmware.
Receiver firmware versionV3.5.3Factory-installed firmware.

Related guides